MAX145AEPA vs MAX176AEPA+ तुलना
विस्तृत दोनों ओर की तुलना MAX145AEPA द्वारा Analog Devices और MAX176AEPA+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Maxim Integrated
MAX176AEPA+ - 12-Bit 250ksps Serial ADC with T/H | Maxim Integrated
MAX176AEPA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX145AEPA | MAX176AEPA+ |
|---|---|---|
| ब्रांड | Analog Devices | Maxim Integrated |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Part Number | MAX145AEPA | — |
| Manufacturer | Analog Devices (formerly Maxim Integrated) | — |
| फ़ंक्शन | 12-bit 2-channel SAR analog-to-digital converter (ADC) | — |
| रेज़ोल्यूशन | 12 bits | 12 bits |
| Number of Channels | 2 | 1 |
| Sampling Rate (Throughput) | 108 ksps | — |
| Conversion Architecture | Successive-approximation (SAR) | Successive Approximation (SAR) |
| Conversion Time | 7.4 us (typical) | 3.5 µs (typ) |
| Wake-Up Time | 2.5 us | — |
| Input Type | True differential (MAX145) / single-ended selectable (MAX144) | Single-Ended (unipolar or bipolar with scaling) |
| Supply Voltage (VDD) | +2.7 V to +5.25 V (single supply) | — |
| Active Power Consumption | 3.2 mW at VDD = +3.6 V | — |
| शटडाउन करंट | < 10 uA (auto power-down) | — |
| Integral Nonlinearity (INL) | ±1 LSB (max) | — |
| Differential Nonlinearity (DNL) | ±0.5 LSB (max, no missing codes) | — |
| Digital Interface | 3-wire SPI / QSPI / MICROWIRE-compatible serial | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C (E suffix = industrial) | -40 °C to +85 °C (industrial) |
| पैकेज / केस | 8-pin PDIP (0.300 inch / 7.62 mm body) | — |
| माउंटिंग प्रकार | Through-Hole (THT) | Through-Hole |
| Internal Reference | +2.5 V | Buried-zener, on-chip |
| RoHS स्थिति | Non-RoHS (pre-2011 vintage product; + variant is RoHS) | Compliant |
| सैंपलिंग रेट | — | 250 ksps |
| Analog Supply Voltage | — | +5 V (typ), VSS = -12 V or -15 V |
| Analog Input Range | — | 0 V to +5 V (unipolar) or ±5 V (bipolar) |
| Integral Linearity Error | — | [DATA_NEEDED: INL max LSB] |
| Track-and-Hold Acquisition Time | — | 0.4 µs (max) |
| Output Interface | — | Serial (SPI / QSPI / MICROWIRE compatible) |
| पैकेज | — | 8-pin PDIP (through-hole, plastic DIP-8) |
| Power Dissipation | — | [DATA_NEEDED: typical P_D in mW] |
| Lead-Free | — | Yes |