MAX14852GWE+ vs MAX14882AWE+T तुलना
विस्तृत दोनों ओर की तुलना MAX14852GWE+ द्वारा Analog Devices और MAX14882AWE+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ सक्रियAnalog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX14852GWE+ | MAX14882AWE+T |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | Transceiver | Isolated high-speed CAN transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 (Half-Duplex CAN) |
| Duplex | Full | — |
| Data Rate (low-speed mode) | 500 kbps | — |
| Data Rate (high-speed mode) | 25 Mbps | — |
| Galvanic Isolation Rating | 2.75 kVRMS (60 s) | — |
| Supply Voltage (VVDD / VBUS) | 1.71 V to 5.5 V | — |
| ESD Protection (HBM, bus pins) | ±35 kV | — |
| ऑपरेटिंग तापमान | -40 °C to +105 °C | — |
| पैकेज | 16-pin WSOIC (7.50 mm body width) | 16-pin Wide-body SOIC (W SOIC) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Fail-safe Receiver | Yes | — |
| Hot-swap Tolerant | Yes | — |
| RoHS स्थिति | Compliant | Compliant |
| Isolation Technology | Maxim iso-loop (integrated transformer driver) | — |
| डेटा दर | — | 1 Mbps |
| Isolation Voltage | — | 5 kVRMS |
| Controller-side Supply (VDDA) | — | 3.0 V to 5.5 V |
| Bus-side Supply (VDDB) | — | 4.5 V to 5.5 V |
| Receiver Input Common-Mode Range | — | -25 V to +25 V |
| Bus Fault Tolerance (CANH/CANL) | — | +/-54 V |
| ESD Protection (Bus-side, HBM) | — | +/-15 kV |
| Integrated LDO Output Current | — | 300 mA (max), 130 mA to internal load |
| ऑपरेटिंग तापमान रेंज | — | -40 C to +125 C |
| Creepage and Clearance | — | 8 mm |
| Standard | — | ISO 11898-2 compliant CAN |