MAX14852GWE+ vs MAX14882AWE+T Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX14852GWE+ sa pamamagitan ng Analog Devices at MAX14882AWE+T sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ NakahandaAnalog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX14852GWE+ | MAX14882AWE+T |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | Transceiver | Isolated high-speed CAN transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 (Half-Duplex CAN) |
| Duplex | Full | — |
| Data Rate (low-speed mode) | 500 kbps | — |
| Data Rate (high-speed mode) | 25 Mbps | — |
| Galvanic Isolation Rating | 2.75 kVRMS (60 s) | — |
| Supply Voltage (VVDD / VBUS) | 1.71 V to 5.5 V | — |
| ESD Protection (HBM, bus pins) | ±35 kV | — |
| Temperature na Operasyon | -40 °C to +105 °C | — |
| Packhaging | 16-pin WSOIC (7.50 mm body width) | 16-pin Wide-body SOIC (W SOIC) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Fail-safe Receiver | Yes | — |
| Hot-swap Tolerant | Yes | — |
| Tindminan RoHS | Compliant | Compliant |
| Isolation Technology | Maxim iso-loop (integrated transformer driver) | — |
| Rate ng Data | — | 1 Mbps |
| Isolation Voltage | — | 5 kVRMS |
| Controller-side Supply (VDDA) | — | 3.0 V to 5.5 V |
| Bus-side Supply (VDDB) | — | 4.5 V to 5.5 V |
| Receiver Input Common-Mode Range | — | -25 V to +25 V |
| Bus Fault Tolerance (CANH/CANL) | — | +/-54 V |
| ESD Protection (Bus-side, HBM) | — | +/-15 kV |
| Integrated LDO Output Current | — | 300 mA (max), 130 mA to internal load |
| Hanay ng Temperature na Operasyon | — | -40 C to +125 C |
| Creepage and Clearance | — | 8 mm |
| Standard | — | ISO 11898-2 compliant CAN |