MAX14882AWE+ vs MAX22028AWA+ तुलना
विस्तृत दोनों ओर की तुलना MAX14882AWE+ द्वारा Analog Devices और MAX22028AWA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ सक्रियAnalog Devices
MAX22028AWA+ - 3.5kVRMS Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX22028AWA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX14882AWE+ | MAX22028AWA+ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | USB Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | Isolated High-Speed CAN Transceiver | Isolated half-duplex RS-485/RS-422 transceiver |
| Protocol | ISO 11898-2 CAN | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| डेटा दर | up to 1 Mbps | — |
| Galvanic Isolation Voltage | 5000 VRMS (60s) | 3.5 kVRMS (60 s, per datasheet) |
| VDDA Supply Voltage (Controller-side) | 3.0 V to 5.5 V | — |
| VDDB Supply Voltage (Bus-side) | 4.5 V to 5.5 V | — |
| Receiver Common-Mode Range | -25 V to +25 V | — |
| CANH/CANL Fault Tolerance | ±54 V | — |
| ESD Protection (Bus-side, HBM) | ±15 kV | — |
| Integrated Transformer Driver | Yes | — |
| Auxiliary LDO Output Current | 130 mA internal / 300 mA max | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | — |
| पैकेज | 16-pin Wide SOIC (W SOIC) | 8-SOIC, wide body (5.5 mm creepage) |
| Creepage and Clearance | 8 mm | — |
| RoHS स्थिति | Compliant | Compliant |
| Duplex | — | Half duplex |
| Data Rate (max) | — | 16 Mbps |
| Supply Voltage (UART side) | — | 3.0 V to 3.6 V |
| Bus Fault Tolerance | — | [DATA_NEEDED: exact +/- V rating] |
| Creepage Distance | — | 5.5 mm (wide-body SOIC) |
| ऑपरेटिंग तापमान | — | -40C to +85C |
| माउंटिंग प्रकार | — | Surface Mount |
| AutoDirection Control | — | Yes (internal, no DE/RE pin required) |
| Hot-Swap Support | — | Yes (cable side) |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |