MAX232NG4 vs MAX232ACPE+ तुलना
विस्तृत दोनों ओर की तुलना MAX232NG4 द्वारा Texas Instruments और MAX232ACPE+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX232NG4 | MAX232ACPE+ |
|---|---|---|
| ब्रांड | Texas Instruments | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | Obsolete | Unknown |
| Product Type | Dual RS-232 line driver and receiver | RS-232 transceiver |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Duplex Mode | Full duplex | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 120 kbps | — |
| Receiver Input Threshold | 1.3 V typical | — |
| Receiver Hysteresis | 500 mV typical | — |
| Receiver Input Voltage Range | ±30 V | — |
| Driver Output Level | ±9 V | — |
| ESD Protection | ±2 kV | [DATA_NEEDED: ESD protection rating] |
| ऑपरेटिंग तापमान रेंज | 0 °C to 70 °C | — |
| पैकेज | 16-pin PDIP | 16-pin PDIP |
| माउंटिंग प्रकार | Through hole | Through-hole |
| Voltage Generation | Capacitive charge-pump voltage generator | — |
| लाइफसाइकिल स्थिति | Obsolete | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Driver Channels | — | 2 |
| Receiver Channels | — | 2 |
| सप्लाई वोल्टेज | — | +5 V |
| Interface Standards | — | EIA/TIA-232E and V.28/V.24 |
| Manufacturer | — | Maxim Integrated |
| Product Description | — | +5 V-powered multichannel RS-232 drivers/receivers |
| Driver/Receiver Count | — | 2/2 |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| डेटा दर | — | [DATA_NEEDED: maximum data rate] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Charge-Pump Capacitors | — | [DATA_NEEDED: recommended external capacitor values] |
| RoHS स्थिति | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Pinout | — | [DATA_NEEDED: complete numbered pinout] |