MAX232ACPE+ - RS-232 Transceiver, 5V, PDIP-16 | Maxim
MPN: MAX232ACPE+ ✗ जीवन की समाप्तिMAX232ACPE+ अवलोकन
An RS-232 transceiver is an interface IC that translates digital logic levels between a host or controller and a RS-232 cable. A driver converts TTL or CMOS signals into RS-232-level signals, while a receiver converts transmitted RS-232 levels back into logic levels. The MAX232ACPE+ is therefore placed between a digital system and an external serial connector, providing bidirectional communication through two driver and two receiver channels.
The manufacturer family description states that the MAX220–MAX249 devices are intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where ±12 V is not available. The +5 V-powered architecture supports systems whose logic supply is commonly 5 V. The verified data also identifies the part as a 2/2 transceiver and as a 5 V multichannel RS-232 driver/receiver. Exact electrical limits, slew rates, receiver thresholds, supply-current figures, and temperature limits are marked as DATA_NEEDED because they are not included in the supplied verified excerpts.
Typical uses include RS-232 console links, industrial-control serial ports, test equipment, embedded serial adapters, and legacy peripheral connections. The MAX232ACPE+ is appropriate when the board requires a conventional through-hole RS-232 interface and a 16-pin PDIP footprint. Designers should verify the complete datasheet pinout, charge-pump capacitor requirements, logic levels, data-rate limits, and ESD requirements before production release, because those values are not present in the supplied source snippets.
The key design consideration is to treat the MAX232ACPE+ as a physical-layer interface rather than a protocol converter. The application must handle framing, baud-rate configuration, parity, flow control, and connector wiring separately. External charge-pump capacitors, input/output protection, grounding, and cable routing remain important in a working RS-232 design. The MAX232ACPE+ is best selected when a 16-pin PDIP RS-232 transceiver with two drivers and two receivers is required and the existing board already matches the verified package and pin arrangement.
This page combines the verified distributor identity, manufacturer-family interface description, package information, and sourced cross-reference data. It does not infer unprovided electrical specifications, lifecycle claims, pricing values, compliance status, or complete pin assignments.
के लिए ड्रॉप-इन विकल्प MAX232ACPE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX232ACPE+ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type, Mounting Type, Package, ESD Protection, RoHS Status.
MAX232EPE+
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX232ACPE
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX232AC/D
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX232ACUE+
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX232ACWE-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX232ACPE+ विशेषताएं
| Product Type | RS-232 transceiver |
| Driver Channels | 2 |
| Receiver Channels | 2 |
| सप्लाई वोल्टेज | +5 V |
| Interface Standards | EIA/TIA-232E and V.28/V.24 |
| पैकेज | 16-pin PDIP |
| माउंटिंग प्रकार | Through-hole |
| Manufacturer | Maxim Integrated |
| Product Description | +5 V-powered multichannel RS-232 drivers/receivers |
| Driver/Receiver Count | 2/2 |
| RoHS स्थिति | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
MAX232ACPE+ 16-pin pdip पिन कॉन्फ़िगरेशन गाइड
MAX232ACPE+ (16-pin pdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX232ACPE+.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MAX232ACPE+ के लिए उपयुक्त है 6 अनुप्रयोगs: RS-232 Console Interface, Industrial Control Serial Port, Test and Measurement Equipment, Embedded Serial Adapter, Legacy Peripheral Connectivity, Battery-Powered RS-232 Equipment.
RS-232 Console Interface
MAX232ACPE+ fits a console connection between a 5 V controller and an RS-232 terminal because it provides two driver channels and two receiver channels in a 16-pin PDIP package. The MAX220–MAX249 family is intended for EIA/TIA-232E and V.28/V.24 interfaces where ±12 V is unavailable. Place the transceiver between the controller UART and the connector, then use the device’s charge-pump network and logic-side supply exactly as specified by the manufacturer datasheet. The supplied sources verify the 2/2 channel count and +5 V-powered concept, but exact logic thresholds, data rate, and capacitor values remain DATA_NEEDED.
अनुशंसित
Industrial Control Serial Port
The MAX232ACPE+ can provide a conventional RS-232 physical layer for industrial equipment that retains a 5 V logic supply and uses a through-hole interface IC. Its two transmitters and two receivers support multiple RS-232 signal paths, while the family description confirms suitability for V.28 and V.24-style communications. The circuit must still handle protocol timing, connector pin assignment, cable return, and protection. Verify the complete PDIP pinout and operating-temperature limits because those details are not included in the supplied excerpts.
अनुशंसित
Test and Measurement Equipment
A MAX232ACPE+ is appropriate for legacy test equipment that exposes a 5 V RS-232 service port. The transceiver bridges the instrument’s digital control logic and an external PC or controller without requiring separate ±12 V supplies, which the verified MAX220–MAX249 description specifically highlights. Use the driver outputs toward the RS-232 connector and receiver inputs toward the instrument logic. Because the supplied sources do not state data rate, ESD level, receiver threshold, or charge-pump capacitor recommendations, those values must be validated before layout signoff.
अनुशंसित
Embedded Serial Adapter
MAX232ACPE+ can terminate an older RS-232 link on an embedded controller board that uses 5 V digital logic and has a suitable PDIP footprint. The two-driver/two-receiver arrangement is useful when the system needs more than one serial signal, while the +5 V-powered family architecture simplifies systems without ±12 V rails. The board still needs connector protection, defined grounding, and verified charge-pump capacitors. Do not substitute a surface-mount alternative without confirming that the mechanical footprint and pin functions match.
अनुशंसित
Legacy Peripheral Connectivity
The MAX232ACPE+ is useful when a modern controller must communicate with a legacy peripheral through RS-232 rather than a modern differential bus. The MAX220–MAX249 family description specifically targets EIA/TIA-232E and V.28/V.24 interfaces, and the verified listing confirms two transmit and two receive channels. Designers should implement the UART protocol and connector wiring separately from the transceiver’s physical-layer function. Confirm the exact MAX232ACPE+ pinout, temperature grade, and external capacitor requirements before release.
अनुशंसित
Battery-Powered RS-232 Equipment
The MAX220–MAX249 family description highlights applications where ±12 V is unavailable, making MAX232ACPE+ a candidate for battery-powered or single-supply RS-232 equipment. The +5 V-powered transceiver can sit between a low-voltage digital subsystem and an RS-232 port, avoiding a separate dual-rail driver supply. Actual battery suitability depends on supply-current limits, shutdown behavior, and standby consumption, none of which are included in the supplied data. Those values must be checked in the complete manufacturer datasheet before claiming low-power operation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MAX232ACPE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MAX232EPE+ | MAX232ACPE | MAX232AC/D | MAX232ACUE+ | MAX232ACWE-T |
|---|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
मुख्य विशेषताएँ
- Verified two-driver/two-receiver configuration (बनामMAX232EPE+)
- Higher stated data-rate comparison (बनामMAX232EPE+)
- Single-supply RS-232 positioning (बनामMAX232ACPE)
- Through-hole package alignment (बनामMAX232AC/D)
- Family interface compatibility (बनामSP3232EB)
डिज़ाइन नोट्स
Because the verified package is a 16-pin PDIP, preserve through-hole footprint clearance and route the RS-232 connector, logic-side UART, and protection network around the transceiver. Confirm the exact pin assignment from the manufacturer datasheet before fabrication; the supplied excerpts do not provide a complete numbered pinout, so a generic MAX232 diagram should not be copied without verification.
Treat the MAX232ACPE+ as a +5 V RS-232 transceiver and decouple the supply close to the device using the manufacturer’s recommended capacitor network. The MAX220–MAX249 family uses charge-pump circuitry for single-supply RS-232 operation, but the exact external capacitor values and tolerances are DATA_NEEDED in the supplied data. Do not select capacitors from generic RS-232 examples without checking the exact datasheet.
Do not assume that MAX232ACPE+, MAX232EPE+, MAX232AC/D, MAX232ACUE+, or MAX232ACWE-T are automatically interchangeable. The supplied comparison data reports 200 kb/s versus 120 kb/s and 0 C versus -40 C for MAX232ACPE+ versus MAX232EPE+, while the other source excerpts explicitly require package and pinout checks. Validate suffix-specific ratings and the complete pinout before substitution.
Keep the RS-232 connector, cable entry, protection components, and transceiver interface path physically separated from sensitive analog or high-speed digital circuits. The transceiver handles the physical RS-232 levels, not cable shielding, grounding, or protocol framing. Validate return-path continuity and connector pin assignments in the system schematic and layout.
अनुपालन जानकारी
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. EIA/TIA-232E and V.28/V.24 are interface application references from the manufacturer-family description, not independent compliance certifications.