MAX3095CEE+ vs MAX3095CSE+ तुलना

विस्तृत दोनों ओर की तुलना MAX3095CEE+ द्वारा Analog Devices और MAX3095CSE+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3095CEE+ MAX3095CEE+ - ±15kV ESD, 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CEE+ - ±15kV ESD, 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CEE+ ✓ सक्रिय
Analog Devices
MAX3095CSE+ MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CSE+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3095CEE+ MAX3095CSE+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Receiver (0/4 driver/receiver) —
Protocol RS-422, RS-485 —
Number of Receivers 4 —
डेटा दर 10 Mbps (minimum) —
सप्लाई वोल्टेज 4.75 V to 5.25 V (5 V nominal) +5 V
सप्लाई करंट 13 mA typical (all channels active) [DATA_NEEDED: supply current]
ESD Protection (Receiver Inputs) ±15 kV HBM —
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV typical —
Input Hysteresis 25 mV typical —
Fail-Safe Bias Yes (internal, forces logic-high on open/short inputs) —
ऑपरेटिंग तापमान 0 °C to +70 °C (commercial C-grade) —
पैकेज 16-pin QSOP 16-SOIC
माउंटिंग प्रकार Surface Mount Surface mount
MSL स्तर 1 (unlimited) —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Receiver Channels — 4 channels
Supported Standards — RS-422 and RS-485 receiver operation
Maximum Data Rate — 10 Mbps
Input ESD Protection, Human Body Model — ±15 kV
Input ESD Protection, Air-Gap Discharge — ±15 kV
Input ESD Protection, Contact Discharge — ±8 kV
Product Type — Quad differential line receiver
ESD Protection Location — All receiver inputs
Application Category — RS-422/RS-485/RS-423 bus receiver
Level Translation — Receiver interface application
Telecommunications Suitability — Telecommunications equipment application listed by manufacturer
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Logic Levels — [DATA_NEEDED: output logic voltage levels]
Propagation Delay — [DATA_NEEDED: propagation delay]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध