MAX3095CEE+ vs MAX3095CSE+ So sánh

So sánh chi tiết song song của MAX3095CEE+ bằng Analog Devices và MAX3095CSE+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3095CSE+ MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices

MAX3095CSE+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3095CEE+ MAX3095CSE+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng Receiver (0/4 driver/receiver) —
Protocol RS-422, RS-485 —
Number of Receivers 4 —
Tốc độ dữ liệu 10 Mbps (minimum) —
Điện áp cung cấp 4.75 V to 5.25 V (5 V nominal) +5 V
Điện áp cung cấp 13 mA typical (all channels active) [DATA_NEEDED: supply current]
ESD Protection (Receiver Inputs) ±15 kV HBM —
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV typical —
Input Hysteresis 25 mV typical —
Fail-Safe Bias Yes (internal, forces logic-high on open/short inputs) —
Nhiệt độ hoạt động 0 °C to +70 °C (commercial C-grade) —
Hộp 16-pin QSOP 16-SOIC
Kiểu lắp đặt Surface Mount Surface mount
Cấp MSL 1 (unlimited) —
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Receiver Channels — 4 channels
Supported Standards — RS-422 and RS-485 receiver operation
Maximum Data Rate — 10 Mbps
Input ESD Protection, Human Body Model — ±15 kV
Input ESD Protection, Air-Gap Discharge — ±15 kV
Input ESD Protection, Contact Discharge — ±8 kV
Product Type — Quad differential line receiver
ESD Protection Location — All receiver inputs
Application Category — RS-422/RS-485/RS-423 bus receiver
Level Translation — Receiver interface application
Telecommunications Suitability — Telecommunications equipment application listed by manufacturer
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Logic Levels — [DATA_NEEDED: output logic voltage levels]
Propagation Delay — [DATA_NEEDED: propagation delay]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá