MAX338EPE+ vs MAX338CSE+ तुलना
विस्तृत दोनों ओर की तुलना MAX338EPE+ द्वारा Analog Devices और MAX338CSE+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX338EPE+ | MAX338CSE+ |
|---|---|---|
| ब्रांड | Analog Devices | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 8:1 single-ended CMOS analog multiplexer | — |
| Number of Channels | 8 inputs to 1 common output | 8 single-ended or 2x4 differential |
| On-Resistance | 400 ohm | — |
| Address Control | 3-bit binary address | — |
| पैकेज | 16-PDIP | 16-pin Narrow SOIC (NSOIC) |
| Number of Terminals | 16 | — |
| माउंटिंग प्रकार | Through-hole | Surface Mount |
| Temperature Grade | Industrial | — |
| Technology | CMOS analog multiplexer | — |
| Switch Type | Single circuit IC switch | — |
| Signal Configuration | Single-ended | — |
| Leakage Characteristic | Low-leakage | — |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage] | — |
| Control Logic Levels | [DATA_NEEDED: control logic levels] | — |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Switching Time | [DATA_NEEDED: switching time] | — |
| इनपुट कैपेसिटेंस | [DATA_NEEDED: input capacitance] | — |
| आउटपुट कैपेसिटेंस | [DATA_NEEDED: output capacitance] | — |
| Off-Resistance | [DATA_NEEDED: off-resistance] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant (Pb-free suffix '+') |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | 0 C to +70 C (commercial) |
| फ़ंक्शन | — | 8:1 analog multiplexer (or dual 4:1) |
| On-State Resistance (RON) | — | 400 ohm (max 650 ohm over signal) |
| Single Supply Voltage | — | +4.5 V to +30 V |
| Dual Supply Voltage | — | +/-4.5 V to +/-20 V |
| Logic Compatibility | — | TTL/CMOS compatible |
| Channel Leakage | — | Low-leakage CMOS, ~ nA typical |
| Switching Action | — | Break-before-make |
| Address Lines | — | 3-bit binary (A0, A1, A2) |
| Enable Input | — | Active-low EN |
| On Time (tON) | — | [DATA_NEEDED: ON switching time] |
| Off Time (tOFF) | — | [DATA_NEEDED: OFF switching time] |
| ESD Protection | — | Yes (per datasheet) |