MAX339CPE+ vs MAX338CPE+ तुलना

विस्तृत दोनों ओर की तुलना MAX339CPE+ द्वारा Analog Devices और MAX338CPE+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX339CPE+ MAX339CPE+ - Dual 4:1 CMOS Analog Multiplexer | Analog Devices

MAX339CPE+ - Dual 4:1 CMOS Analog Multiplexer | Analog Devices

MAX339CPE+ ✓ सक्रिय
Analog Devices
MAX338CPE+ MAX338CPE+ - 8:1 CMOS Analog Multiplexer | Analog Devices

MAX338CPE+ - 8:1 CMOS Analog Multiplexer | Analog Devices

MAX338CPE+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX339CPE+ MAX338CPE+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Multiplexer Configuration Dual 4:1 —
Number of Circuits 2 circuits 1 circuit
Input Channels per Circuit 4 channels —
Maximum On-Resistance 400 ohms —
Single-Supply Voltage Range 4.5 V to 30 V 4.5 V to 30 V
Dual-Supply Voltage Range +/-4.5 V to +/-20 V ±4.5 V to ±20 V
पैकेज 16-pin PDIP 16-pin PDIP
Addressing 2-bit binary addressing per 4:1 section —
Switch Type CMOS analog multiplexer —
Operating Mode Mux or demux —
Maximum On-Time 500 ns —
Maximum Off-Time 500 ns —
Minimum Operating Temperature 0 C —
Maximum Operating Temperature [DATA_NEEDED: maximum operating temperature] —
Leakage Current [DATA_NEEDED: leakage current] —
Charge Injection [DATA_NEEDED: charge injection] [DATA_NEEDED: charge injection]
Channel-to-Channel Off Isolation [DATA_NEEDED: off isolation] —
सप्लाई करंट [DATA_NEEDED: supply current] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Product Type — 8:1 single-ended CMOS analog multiplexer
Number of Channels — 8 analog input channels
On-Resistance — 400 ohm per DigiKey listing; 650 ohm per chipdig listing
Supply Topology — Single supply or dual supply
Technology — CMOS
Signal Type — Single-ended analog
Leakage Characteristic — Low-leakage
माउंटिंग प्रकार — Through hole
Industry-Standard Reference — Pin-compatible upgrade for DG508A and DG509A
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
Channel Selection Control Levels — [DATA_NEEDED: address and enable control logic levels]
Maximum Switching Voltage — [DATA_NEEDED: maximum switching voltage]
Maximum Switched Current — [DATA_NEEDED: maximum switched current]
Off-Isolation — [DATA_NEEDED: off isolation]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध