MAX339CPE+ vs MAX338CPE+ 비교
다음의 상세 나란히 비교: MAX339CPE+ 제조: Analog Devices 및 MAX338CPE+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX339CPE+ | MAX338CPE+ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Multiplexer Configuration | Dual 4:1 | — |
| Number of Circuits | 2 circuits | 1 circuit |
| Input Channels per Circuit | 4 channels | — |
| Maximum On-Resistance | 400 ohms | — |
| Single-Supply Voltage Range | 4.5 V to 30 V | 4.5 V to 30 V |
| Dual-Supply Voltage Range | +/-4.5 V to +/-20 V | ±4.5 V to ±20 V |
| 패키지 | 16-pin PDIP | 16-pin PDIP |
| Addressing | 2-bit binary addressing per 4:1 section | — |
| Switch Type | CMOS analog multiplexer | — |
| Operating Mode | Mux or demux | — |
| Maximum On-Time | 500 ns | — |
| Maximum Off-Time | 500 ns | — |
| Minimum Operating Temperature | 0 C | — |
| Maximum Operating Temperature | [DATA_NEEDED: maximum operating temperature] | — |
| Leakage Current | [DATA_NEEDED: leakage current] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| Channel-to-Channel Off Isolation | [DATA_NEEDED: off isolation] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | 8:1 single-ended CMOS analog multiplexer |
| Number of Channels | — | 8 analog input channels |
| On-Resistance | — | 400 ohm per DigiKey listing; 650 ohm per chipdig listing |
| Supply Topology | — | Single supply or dual supply |
| Technology | — | CMOS |
| Signal Type | — | Single-ended analog |
| Leakage Characteristic | — | Low-leakage |
| 실장 유형 | — | Through hole |
| Industry-Standard Reference | — | Pin-compatible upgrade for DG508A and DG509A |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Channel Selection Control Levels | — | [DATA_NEEDED: address and enable control logic levels] |
| Maximum Switching Voltage | — | [DATA_NEEDED: maximum switching voltage] |
| Maximum Switched Current | — | [DATA_NEEDED: maximum switched current] |
| Off-Isolation | — | [DATA_NEEDED: off isolation] |