MAX3485CSA+ vs MAX3485ECSA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3485CSA+ द्वारा Maxim Integrated और MAX3485ECSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown
Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3485CSA+ MAX3485ECSA+
ब्रांड Maxim Integrated Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति Unknown सक्रिय
Product Type RS-485/RS-422 transceiver Half-duplex RS-485/RS-422 transceiver
सप्लाई वोल्टेज 3.3 V 3.3 V
डेटा दर 10 Mbps —
Duplex Mode Half-duplex —
Driver Count 1 driver —
Receiver Count 1 receiver —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Driver Feature Slew-rate-limited driver family feature —
Short-Circuit Protection Short-circuit current limited driver —
थर्मल शटडाउन Driver enters high-impedance state during thermal shutdown —
Receiver Feature Fail-safe receiver input —
पैकेज 8-SOIC, 0.154 inch, 3.90 mm width 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज 0C to +70C [DATA_NEEDED: operating temperature range]
Channel Direction 1 transmitter and 1 receiver —
ESD Protection [DATA_NEEDED: ESD protection rating] ±15 kV
Receiver Input Common-Mode Range [DATA_NEEDED: receiver input common-mode range] —
सप्लाई करंट [DATA_NEEDED: operating and quiescent supply current] [DATA_NEEDED: typical and maximum supply current]
Logic Output Levels [DATA_NEEDED: logic output voltage levels] —
Termination Requirement [DATA_NEEDED: termination and biasing requirements] —
Driver/Receiver Count — 1 driver and 1 receiver
Maximum Data Rate — 12 Mbps
Driver Edge Control — Slew-rate limited
Driver Output Current — [DATA_NEEDED: differential output current]
Receiver Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Shutdown and Enable Control — [DATA_NEEDED: DE and active-low RE control details]
RoHS स्थिति — unknown
REACH Status — unknown
AEC-Q100 Qualification — unknown

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध