MAX3485CSA+ vs MAX3485ECSA+ So sánh

So sánh chi tiết song song của MAX3485CSA+ bằng Maxim Integrated và MAX3485ECSA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown
Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3485CSA+ MAX3485ECSA+
Thương hiệu Maxim Integrated Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Unknown Hoạt động
Product Type RS-485/RS-422 transceiver Half-duplex RS-485/RS-422 transceiver
Điện áp cung cấp 3.3 V 3.3 V
Tốc độ dữ liệu 10 Mbps —
Duplex Mode Half-duplex —
Driver Count 1 driver —
Receiver Count 1 receiver —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Driver Feature Slew-rate-limited driver family feature —
Short-Circuit Protection Short-circuit current limited driver —
Tắt nhiệt Driver enters high-impedance state during thermal shutdown —
Receiver Feature Fail-safe receiver input —
Hộp 8-SOIC, 0.154 inch, 3.90 mm width 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động 0C to +70C [DATA_NEEDED: operating temperature range]
Channel Direction 1 transmitter and 1 receiver —
ESD Protection [DATA_NEEDED: ESD protection rating] ±15 kV
Receiver Input Common-Mode Range [DATA_NEEDED: receiver input common-mode range] —
Điện áp cung cấp [DATA_NEEDED: operating and quiescent supply current] [DATA_NEEDED: typical and maximum supply current]
Logic Output Levels [DATA_NEEDED: logic output voltage levels] —
Termination Requirement [DATA_NEEDED: termination and biasing requirements] —
Driver/Receiver Count — 1 driver and 1 receiver
Maximum Data Rate — 12 Mbps
Driver Edge Control — Slew-rate limited
Driver Output Current — [DATA_NEEDED: differential output current]
Receiver Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Shutdown and Enable Control — [DATA_NEEDED: DE and active-low RE control details]
Trạng thái RoHS — unknown
REACH Status — unknown
AEC-Q100 Qualification — unknown

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá