MAX3485EPA+ vs MAX3485ECPA+ तुलना
विस्तृत दोनों ओर की तुलना MAX3485EPA+ द्वारा Analog Devices और MAX3485ECPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECPA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3485EPA+ | MAX3485ECPA+ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 interface transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Transmission Data Rate | Up to 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | RS-422 and RS-485 |
| Driver Protection | Short-circuit current limiting and thermal shutdown | — |
| Driver Output State During Thermal Shutdown | High impedance | — |
| Driver Slew Control | Slew-rate limited | — |
| Receiver Fail-Safe Feature | Yes | — |
| पैकेज | 8-pin PDIP | 8-pin PDIP |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Operating Voltage | 3.3 V nominal | — |
| Power Dissipation | [DATA_NEEDED: power dissipation specification] | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | ±15 kV |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| सप्लाई वोल्टेज | — | 3.3 V |
| Maximum Data Rate | — | 12 Mbps |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Communication Mode | — | Half-duplex |
| Driver Architecture | — | Slew-rate-limited |
| ESD Protection Level | — | ±15 kV |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | — | [DATA_NEEDED: supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |