MAX3485EPA+ vs MAX3485ECPA+ So sánh

So sánh chi tiết song song của MAX3485EPA+ bằng Analog Devices và MAX3485ECPA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ Hoạt động
Analog Devices
MAX3485ECPA+ MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECPA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3485EPA+ MAX3485ECPA+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 interface transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Transmission Data Rate Up to 10 Mbps —
Driver Count 1 —
Receiver Count 1 —
Supported Standards RS-422 and RS-485 RS-422 and RS-485
Driver Protection Short-circuit current limiting and thermal shutdown —
Driver Output State During Thermal Shutdown High impedance —
Driver Slew Control Slew-rate limited —
Receiver Fail-Safe Feature Yes —
Hộp 8-pin PDIP 8-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
Operating Voltage 3.3 V nominal —
Power Dissipation [DATA_NEEDED: power dissipation specification] —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
ESD Protection [DATA_NEEDED: ESD protection rating] ±15 kV
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Điện áp cung cấp — 3.3 V
Maximum Data Rate — 12 Mbps
Transceiver Configuration — 1 driver / 1 receiver
Communication Mode — Half-duplex
Driver Architecture — Slew-rate-limited
ESD Protection Level — ±15 kV
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Điện áp cung cấp — [DATA_NEEDED: supply current]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Propagation Delay — [DATA_NEEDED: propagation delay]
Shutdown Supply Current — [DATA_NEEDED: shutdown supply current]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá