MAX3488CSA+ vs MAX3488CSA+T तुलना
विस्तृत दोनों ओर की तुलना MAX3488CSA+ द्वारा Analog Devices और MAX3488CSA+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ सक्रियAnalog Devices
MAX3488CSA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+T ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3488CSA+ | MAX3488CSA+T |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| सप्लाई वोल्टेज | 3.3 V | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Control | Slew-rate limited | — |
| Communication Standard | RS-485/RS-422 | — |
| पैकेज | 8-pin NSOIC | 8-SOIC, 0.154 m body width and 3.90 mm overall width |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Low-Power Family | 3.3 V, low-power transceiver | — |
| Cable Reflection Control | Slew-rate-limited driver intended to reduce reflections | Reduced reflections from slew-rate limiting |
| EMI Control | Slew-rate-limited driver intended to reduce EMI | Slew-rate-limited driver reduces EMI |
| Application Topology | RS-422 point-to-point and RS-485 multidrop | — |
| Differential Signal | Balanced line signaling | — |
| Logic Interface | Digital logic-level driver and receiver | — |
| Manufacturer Product Status | Production | — |
| Manufacturer Data Sheet Revision | Rev. 2 | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Typical Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Isolation | [DATA_NEEDED: isolation rating] | — |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Driver Edge Rate | — | Slew-rate limited |
| Supported Protocols | — | RS-422 and RS-485 |
| पिन की संख्या | — | 8 pins |
| Packaging | — | Tape and reel |
| ऑपरेटिंग तापमान रेंज | — | 0°C to +70°C |
| Logic Compatibility | — | 3.3V transceiver interface |