MAX3488CSA+ vs MAX3488CSA+T Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng MAX3488CSA+ sa pamamagitan ng Analog Devices at MAX3488CSA+T sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Analog Devices
MAX3488CSA+T MAX3488CSA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3488CSA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3488CSA+T ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro MAX3488CSA+ MAX3488CSA+T
Brand Analog Devices Analog Devices
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Volte ng Pagbibigay 3.3 V —
Driver Count 1 —
Receiver Count 1 —
Maximum Data Rate 10 Mbps 10 Mbps
Driver Edge Control Slew-rate limited —
Communication Standard RS-485/RS-422 —
Packhaging 8-pin NSOIC 8-SOIC, 0.154 m body width and 3.90 mm overall width
Uri ng Pagpapasok Surface mount Surface mount
Low-Power Family 3.3 V, low-power transceiver —
Cable Reflection Control Slew-rate-limited driver intended to reduce reflections Reduced reflections from slew-rate limiting
EMI Control Slew-rate-limited driver intended to reduce EMI Slew-rate-limited driver reduces EMI
Application Topology RS-422 point-to-point and RS-485 multidrop —
Differential Signal Balanced line signaling —
Logic Interface Digital logic-level driver and receiver —
Manufacturer Product Status Production —
Manufacturer Data Sheet Revision Rev. 2 —
Tindminan RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Temperature na Operasyon [DATA_NEEDED: operating temperature range] —
ESD Rating [DATA_NEEDED: ESD rating] —
Typical Quiescent Current [DATA_NEEDED: quiescent current] —
Output Differential Voltage [DATA_NEEDED: output differential voltage] —
Receiver Input Impedance [DATA_NEEDED: receiver input impedance] —
Isolation [DATA_NEEDED: isolation rating] —
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Supply Voltage Range — 3 V to 3.6 V
Driver Edge Rate — Slew-rate limited
Supported Protocols — RS-422 and RS-485
Bilang ng Pins — 8 pins
Packaging — Tape and reel
Hanay ng Temperature na Operasyon — 0°C to +70°C
Logic Compatibility — 3.3V transceiver interface

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita