MAX3488CSA+ vs MAX3488CPA+ तुलना
विस्तृत दोनों ओर की तुलना MAX3488CSA+ द्वारा Analog Devices और MAX3488CPA+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | MAX3488CSA+ | MAX3488CPA+ |
|---|---|---|
| ब्रांड | Analog Devices | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| सप्लाई वोल्टेज | 3.3 V | 3.3 V |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Control | Slew-rate limited | — |
| Communication Standard | RS-485/RS-422 | — |
| पैकेज | 8-pin NSOIC | 8-pin PDIP |
| माउंटिंग प्रकार | Surface mount | Through-hole |
| Low-Power Family | 3.3 V, low-power transceiver | — |
| Cable Reflection Control | Slew-rate-limited driver intended to reduce reflections | — |
| EMI Control | Slew-rate-limited driver intended to reduce EMI | — |
| Application Topology | RS-422 point-to-point and RS-485 multidrop | — |
| Differential Signal | Balanced line signaling | — |
| Logic Interface | Digital logic-level driver and receiver | — |
| Manufacturer Product Status | Production | — |
| Manufacturer Data Sheet Revision | Rev. 2 | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Typical Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Isolation | [DATA_NEEDED: isolation rating] | — |
| Interface Standards | — | RS-485 and RS-422 |
| Slew Rate | — | Slew-rate limited |
| Logic Compatibility | — | +5 V logic interoperable |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| Driver Enable Control | — | [DATA_NEEDED: enable-control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output logic] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |