MAX3488CSA+ vs MAX3488CPA+ 비교
다음의 상세 나란히 비교: MAX3488CSA+ 제조: Analog Devices 및 MAX3488CPA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ 활성
사양 비교
| 파라미터 | MAX3488CSA+ | MAX3488CPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.96 | $0.00 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| 공급 전압 | 3.3 V | 3.3 V |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Control | Slew-rate limited | — |
| Communication Standard | RS-485/RS-422 | — |
| 패키지 | 8-pin NSOIC | 8-pin PDIP |
| 실장 유형 | Surface mount | Through-hole |
| Low-Power Family | 3.3 V, low-power transceiver | — |
| Cable Reflection Control | Slew-rate-limited driver intended to reduce reflections | — |
| EMI Control | Slew-rate-limited driver intended to reduce EMI | — |
| Application Topology | RS-422 point-to-point and RS-485 multidrop | — |
| Differential Signal | Balanced line signaling | — |
| Logic Interface | Digital logic-level driver and receiver | — |
| Manufacturer Product Status | Production | — |
| Manufacturer Data Sheet Revision | Rev. 2 | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Typical Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Isolation | [DATA_NEEDED: isolation rating] | — |
| Interface Standards | — | RS-485 and RS-422 |
| Slew Rate | — | Slew-rate limited |
| Logic Compatibility | — | +5 V logic interoperable |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| Driver Enable Control | — | [DATA_NEEDED: enable-control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output logic] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |