MAX485EESA+ vs SP485EN-L तुलना

विस्तृत दोनों ओर की तुलना MAX485EESA+ द्वारा Analog Devices और SP485EN-L द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX485EESA+ MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ ✓ सक्रिय
MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX485EESA+ SP485EN-L
ब्रांड Analog Devices MaxLinear
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 Transceiver Half-duplex differential transceiver
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
डेटा दर Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) —
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C -40°C to +85°C
पैकेज / केस 8-pin SOIC (SO-8, 3.9 mm body) —
माउंटिंग प्रकार Surface Mount Surface mount
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSL स्तर 1 (Unlimited) —
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Duplex Mode — Half-duplex
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
पैकेज — 8-pin SOIC
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
RoHS स्थिति — unknown
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध