MAX485EESA+ vs SP485EN-L 比較

詳細な並列比較: MAX485EESA+ メーカー: Analog Devices および SP485EN-L メーカー: MaxLinear。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ MAX485EESA+ SP485EN-L
ブランド Analog Devices MaxLinear
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type RS-485/RS-422 Transceiver Half-duplex differential transceiver
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
データレート Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) —
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
動作温度範囲 -40 °C to +85 °C -40°C to +85°C
パッケージ / ケース 8-pin SOIC (SO-8, 3.9 mm body) —
実装タイプ Surface Mount Surface mount
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSLレベル 1 (Unlimited) —
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Duplex Mode — Half-duplex
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
パッケージ — 8-pin SOIC
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
RoHS ステータス — unknown
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼