MC145572PBR2 vs MX574ALEWI+TCDR तुलना
विस्तृत दोनों ओर की तुलना MC145572PBR2 द्वारा NXP Semiconductors और MX574ALEWI+TCDR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MC145572PBR2 - ISDN U-Interface Transceiver | NXP | 44-LQFP
MC145572PBR2 ObsoleteAnalog Devices
MX574ALEWI+TCDR - 12-Bit 25µs SAR ADC, 28-SOIC | Maxim Integrated
MX574ALEWI+TCDR ✓ सक्रियविशेषता तुलना
| पैरामीटर | MC145572PBR2 | MX574ALEWI+TCDR |
|---|---|---|
| ब्रांड | NXP Semiconductors | Analog Devices |
| श्रेणी | Interface ICs | ADC/DAC |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| Part Type | ISDN U-Interface Transceiver | — |
| Manufacturer | NXP Semiconductors (formerly Freescale / Motorola) | Analog Devices Inc. (formerly Maxim Integrated) |
| सप्लाई वोल्टेज | 5 V (typical) | — |
| डेटा दर | 160 kbps (2B1Q full-duplex over single twisted pair) | — |
| Line Code | 2B1Q (ANSI T1.601-1992) | — |
| Interface Standard | ANSI T1.601-1992 / ETSI ETR 080 | — |
| Operating Modes | NT (Network Termination) and LT (Line Termination), strap-selectable | — |
| HDLC Controller | On-chip, up to 4x 16-bit or 2x 32-bit identifiers | — |
| Echo Canceller | Integrated adaptive | — |
| Scrambler/Descrambler | On-chip | — |
| Host Interface | Parallel microprocessor-compatible | — |
| पैकेज | 44-LQFP (10x10 mm) | 28-pin SOIC wide-body (SOIC-28W) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (commercial, 'L' grade) |
| RoHS स्थिति | RoHS non-compliant (SnPb finish, per legacy Freescale data) | Compliant |
| Lead-Free Status | Contains lead (legacy PBR2 tape-and-reel part marking) | — |
| Series | MC145572 | — |
| Part Status | Obsolete / Last-time-buy stock only | — |
| MPN | — | MX574ALEWI+TCDR |
| Converter Type | — | SAR (Successive Approximation Register) ADC |
| रेज़ोल्यूशन | — | 12 bit |
| Number of Inputs | — | 1 |
| Input Type | — | Single-Ended (unipolar or bipolar ranges via pin strapping) |
| Maximum Conversion Time | — | 25 µs |
| Sample Rate (max) | — | 40 kSPS (typ) |
| Analog Input Ranges | — | 0 to +5 V, 0 to +10 V, ±5 V, ±10 V (software/strap-selectable) |
| Internal Reference | — | +10 V buried Zener, ±0.25 % initial accuracy (typ) |
| Data Interface | — | 12-bit parallel, 8-bit parallel, or serial |
| आउटपुट प्रकार | — | Three-state (high-Z) CMOS-compatible |
| Integral Nonlinearity (A grade) | — | ±1 LSB (max) |
| Supply Voltages | — | V+ = +12 V or +15 V, V- = -12 V or -15 V, VCC (digital) = +5 V |
| Power Consumption | — | 150 mW (typ, ±15 V supply) |
| AEC-Q100 | — | Not qualified (commercial grade) |