MC145572PBR2 vs MX574ALEWI+TCDR موازنہ
تفصیلی ساتھ ساتھ موازنہ از MC145572PBR2 بذریعہ NXP Semiconductors اور MX574ALEWI+TCDR بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
NXP Semiconductors
MC145572PBR2 - ISDN U-Interface Transceiver | NXP | 44-LQFP
MC145572PBR2 ObsoleteAnalog Devices
MX574ALEWI+TCDR - 12-Bit 25µs SAR ADC, 28-SOIC | Maxim Integrated
MX574ALEWI+TCDR ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MC145572PBR2 | MX574ALEWI+TCDR |
|---|---|---|
| برانڈ | NXP Semiconductors | Analog Devices |
| زمرہ | Interface ICs | ADC/DAC |
| لائف سائیکل کی حالت | Obsolete | فعال |
| Part Type | ISDN U-Interface Transceiver | — |
| Manufacturer | NXP Semiconductors (formerly Freescale / Motorola) | Analog Devices Inc. (formerly Maxim Integrated) |
| سپلائی وولٹیج | 5 V (typical) | — |
| ڈیٹا ریٹ | 160 kbps (2B1Q full-duplex over single twisted pair) | — |
| Line Code | 2B1Q (ANSI T1.601-1992) | — |
| Interface Standard | ANSI T1.601-1992 / ETSI ETR 080 | — |
| Operating Modes | NT (Network Termination) and LT (Line Termination), strap-selectable | — |
| HDLC Controller | On-chip, up to 4x 16-bit or 2x 32-bit identifiers | — |
| Echo Canceller | Integrated adaptive | — |
| Scrambler/Descrambler | On-chip | — |
| Host Interface | Parallel microprocessor-compatible | — |
| پیکیج | 44-LQFP (10x10 mm) | 28-pin SOIC wide-body (SOIC-28W) |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface Mount |
| آپریٹنگ درجہ حرارت | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (commercial, 'L' grade) |
| RoHS اسٹیٹس | RoHS non-compliant (SnPb finish, per legacy Freescale data) | Compliant |
| Lead-Free Status | Contains lead (legacy PBR2 tape-and-reel part marking) | — |
| Series | MC145572 | — |
| Part Status | Obsolete / Last-time-buy stock only | — |
| MPN | — | MX574ALEWI+TCDR |
| Converter Type | — | SAR (Successive Approximation Register) ADC |
| ریزولوشن | — | 12 bit |
| Number of Inputs | — | 1 |
| Input Type | — | Single-Ended (unipolar or bipolar ranges via pin strapping) |
| Maximum Conversion Time | — | 25 µs |
| Sample Rate (max) | — | 40 kSPS (typ) |
| Analog Input Ranges | — | 0 to +5 V, 0 to +10 V, ±5 V, ±10 V (software/strap-selectable) |
| Internal Reference | — | +10 V buried Zener, ±0.25 % initial accuracy (typ) |
| Data Interface | — | 12-bit parallel, 8-bit parallel, or serial |
| آؤٹ پٹ کی قسم | — | Three-state (high-Z) CMOS-compatible |
| Integral Nonlinearity (A grade) | — | ±1 LSB (max) |
| Supply Voltages | — | V+ = +12 V or +15 V, V- = -12 V or -15 V, VCC (digital) = +5 V |
| Power Consumption | — | 150 mW (typ, ±15 V supply) |
| AEC-Q100 | — | Not qualified (commercial grade) |