MC68HC908GT16CFB vs MC68HC908GT16CB तुलना
विस्तृत दोनों ओर की तुलना MC68HC908GT16CFB द्वारा NXP Semiconductors और MC68HC908GT16CB द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MC68HC908GT16CFB - 8-bit HC08 MCU, 16KB FLASH, 44-QFP | NXP
MC68HC908GT16CFB NrndNXP Semiconductors
MC68HC908GT16CB - 8-Bit 8MHz 16KB FLASH HC08 MCU | NXP 42-PDIP
MC68HC908GT16CB Obsoleteविशेषता तुलना
| पैरामीटर | MC68HC908GT16CFB | MC68HC908GT16CB |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | NRND | Obsolete |
| Core Architecture | M68HC08 (CPU08) | HC08 (8-bit) |
| डेटा बस चौड़ाई | 8 bit | — |
| Program Memory Type | FLASH | — |
| Program Memory Size | 16 KB (16K x 8) | — |
| RAM Size | 1 KB | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 8 MHz (internal bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vdd min/max] | — |
| ADC | 10-bit successive-approximation, up to 8 channels | 10-bit, 16 channels |
| Timers | 16-bit, with capture/compare/PWM | — |
| Serial Interfaces | SCI (UART), SPI | — |
| GPIO Count | Up to 36 | — |
| I/O Drive Strength | 10 mA source/sink; 20 mA on PTC0-PTC4 | — |
| पैकेज | 44-QFP (10x10 mm) | 42-pin PDIP (through-hole) |
| माउंटिंग प्रकार | Surface Mount | Through-Hole |
| ऑपरेटिंग तापमान रेंज | Industrial (per suffix); [DATA_NEEDED: exact -C/-V range] | — |
| Debug Interface | Background Debug Mode (BDM), single-wire | — |
| Low-Power Modes | STOP and WAIT with periodic wakeup | — |
| RoHS स्थिति | [DATA_NEEDED: per suffix] | [DATA_NEEDED: RoHS compliance flag] |
| Program Memory | — | 16 KB FLASH |
| RAM | — | 512 bytes |
| Maximum Bus Frequency | — | 8 MHz |
| सप्लाई वोल्टेज | — | 3 V to 5.5 V |
| SCI (UART) | — | 1 channel |
| SPI | — | 1 channel |
| Timer Channels | — | 6 channels (TPM) |
| ऑपरेटिंग तापमान | — | -40C to +85C (industrial) |
| LVI (Brown-out) | — | Yes (Low-Voltage Inhibit) |
| On-chip Programming | — | FLASH in-circuit programmable |