MC68HC908GT16CFB vs MC68HC908GT16CB 比較
詳細並排比較 MC68HC908GT16CFB 由 NXP Semiconductors 與 MC68HC908GT16CB 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
NXP Semiconductors
MC68HC908GT16CFB - 8-bit HC08 MCU, 16KB FLASH, 44-QFP | NXP
MC68HC908GT16CFB NrndNXP Semiconductors
MC68HC908GT16CB - 8-Bit 8MHz 16KB FLASH HC08 MCU | NXP 42-PDIP
MC68HC908GT16CB Obsolete規格比較
| 參數 | MC68HC908GT16CFB | MC68HC908GT16CB |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | Microcontrollers | Microcontrollers |
| 生命週期狀態 | NRND | Obsolete |
| Core Architecture | M68HC08 (CPU08) | HC08 (8-bit) |
| 資料匯流排寬度 | 8 bit | — |
| Program Memory Type | FLASH | — |
| Program Memory Size | 16 KB (16K x 8) | — |
| RAM Size | 1 KB | — |
| 最大時脈頻率 | 8 MHz (internal bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vdd min/max] | — |
| ADC | 10-bit successive-approximation, up to 8 channels | 10-bit, 16 channels |
| Timers | 16-bit, with capture/compare/PWM | — |
| Serial Interfaces | SCI (UART), SPI | — |
| GPIO Count | Up to 36 | — |
| I/O Drive Strength | 10 mA source/sink; 20 mA on PTC0-PTC4 | — |
| 封裝 | 44-QFP (10x10 mm) | 42-pin PDIP (through-hole) |
| 安裝類型 | Surface Mount | Through-Hole |
| 工作溫度範圍 | Industrial (per suffix); [DATA_NEEDED: exact -C/-V range] | — |
| Debug Interface | Background Debug Mode (BDM), single-wire | — |
| Low-Power Modes | STOP and WAIT with periodic wakeup | — |
| RoHS 狀態 | [DATA_NEEDED: per suffix] | [DATA_NEEDED: RoHS compliance flag] |
| Program Memory | — | 16 KB FLASH |
| RAM | — | 512 bytes |
| Maximum Bus Frequency | — | 8 MHz |
| 供應電壓 | — | 3 V to 5.5 V |
| SCI (UART) | — | 1 channel |
| SPI | — | 1 channel |
| Timer Channels | — | 6 channels (TPM) |
| 工作溫度 | — | -40C to +85C (industrial) |
| LVI (Brown-out) | — | Yes (Low-Voltage Inhibit) |
| On-chip Programming | — | FLASH in-circuit programmable |