MK60DN512VMD10 vs MK60FN1M0VMD12 तुलना
विस्तृत दोनों ओर की तुलना MK60DN512VMD10 द्वारा NXP Semiconductors और MK60FN1M0VMD12 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VMD10 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MK60DN512VMD10 | MK60FN1M0VMD12 |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4 with FPU and DSP | ARM Cortex-M4F (with FPU + DSP) |
| Core Bit Width | 32-bit | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 100 MHz | — |
| Program Flash Memory | 512 KB (512K x 8) | — |
| SRAM | 128 KB | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| I/O Pins | 66 | — |
| पैकेज | 144-MAPBGA (13 x 13 mm) | 144-MAPBGA 13x13 mm |
| माउंटिंग प्रकार | Surface Mount (BGA) | Surface Mount (BGA) |
| ऑपरेटिंग तापमान रेंज | -40 C to +105 C | — |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 PTP hardware | — |
| USB Controller | USB 2.0 Full-Speed Device/Host/OTG | — |
| ADC | Two 16-bit SAR ADC | — |
| DAC | Two 12-bit DAC | 12-bit DAC |
| Cryptography | Hardware encryption and tamper detection | — |
| MSL स्तर | 3 (per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | Compliant |
| CPU Maximum Frequency | — | 120 MHz |
| Program Flash | — | 1 MB (1024 KB) |
| FlexMemory / EEPROM Emulation | — | Yes (256 KB FlexNVM, partitionable) |
| Operating Voltage Range | — | 1.71 V to 3.6 V |
| ऑपरेटिंग तापमान | — | -40C to +105C (Industrial) |
| USB | — | USB 2.0 Full-Speed OTG + USB 2.0 High-Speed (with integrated PHY) |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 (MII/RMII interface to external PHY) |
| SAR ADC | — | 16-bit, dual ADC, up to 24 channels |
| Timers | — | FlexTimer (FTM) modules; PDB; LPIT |
| Communication Peripherals | — | 3x UART, 2x CAN (FlexCAN), 3x SPI, 3x I2C, I2S |
| External Bus | — | FlexBus + SDRAM controller |
| Low-Power Modes | — | VLLS0/1/3, LLS, VLPR, RUN modes (~200 uA/MHz typical) |
| Security | — | Hardware CRC, tamper detect, unique 80-bit device ID |
| Lead-Free | — | Yes |