MK60DN512VMD10 vs MK60FN1M0VMD12 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MK60DN512VMD10 tarafından NXP Semiconductors ve MK60FN1M0VMD12 tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VMD10 ✓ AktifÖzellik Karşılaştırması
| Parametre | MK60DN512VMD10 | MK60FN1M0VMD12 |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Core Architecture | ARM Cortex-M4 with FPU and DSP | ARM Cortex-M4F (with FPU + DSP) |
| Core Bit Width | 32-bit | — |
| Azami Saat Hızı | 100 MHz | — |
| Program Flash Memory | 512 KB (512K x 8) | — |
| SRAM | 128 KB | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| I/O Pins | 66 | — |
| Paket | 144-MAPBGA (13 x 13 mm) | 144-MAPBGA 13x13 mm |
| Montaj Türü | Surface Mount (BGA) | Surface Mount (BGA) |
| İşletim Sıcaklığı Aralığı | -40 C to +105 C | — |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 PTP hardware | — |
| USB Controller | USB 2.0 Full-Speed Device/Host/OTG | — |
| ADC | Two 16-bit SAR ADC | — |
| DAC | Two 12-bit DAC | 12-bit DAC |
| Cryptography | Hardware encryption and tamper detection | — |
| MSL Seviyesi | 3 (per JEDEC J-STD-020) | — |
| RoHS Durumu | Compliant | Compliant |
| CPU Maximum Frequency | — | 120 MHz |
| Program Flash | — | 1 MB (1024 KB) |
| FlexMemory / EEPROM Emulation | — | Yes (256 KB FlexNVM, partitionable) |
| Operating Voltage Range | — | 1.71 V to 3.6 V |
| İşletim Sıcaklığı | — | -40C to +105C (Industrial) |
| USB | — | USB 2.0 Full-Speed OTG + USB 2.0 High-Speed (with integrated PHY) |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 (MII/RMII interface to external PHY) |
| SAR ADC | — | 16-bit, dual ADC, up to 24 channels |
| Timers | — | FlexTimer (FTM) modules; PDB; LPIT |
| Communication Peripherals | — | 3x UART, 2x CAN (FlexCAN), 3x SPI, 3x I2C, I2S |
| External Bus | — | FlexBus + SDRAM controller |
| Low-Power Modes | — | VLLS0/1/3, LLS, VLPR, RUN modes (~200 uA/MHz typical) |
| Security | — | Hardware CRC, tamper detect, unique 80-bit device ID |
| Lead-Free | — | Yes |