NE5534D vs NE5534DRG4 तुलना
विस्तृत दोनों ओर की तुलना NE5534D द्वारा Texas Instruments और NE5534DRG4 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | NE5534D | NE5534DRG4 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Unknown |
| Product Type | Single low-noise operational amplifier | — |
| Manufacturer | Texas Instruments | — |
| Number of Circuits | 1 | — |
| पैकेज | 8-SOIC | 8-SOIC |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 dB typical | — |
| Slew Rate | 13 V/us typical | 13 V/µs typical |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | 100 V/mV typical under cited conditions |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | Single low-noise operational amplifier |
| Noise Voltage Density | — | 3.5 nV/√Hz typical |
| High DC Voltage Gain | — | 100 dB typical |
| Supply Voltage Range | — | Wide supply-voltage range; exact limits [DATA_NEEDED: supply voltage range] |
| Circuit Count | — | 1 circuit |
| Package Width | — | 0.154 inch / 3.90 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Current | — | [DATA_NEEDED: output current] |