NE5534D vs NE5534DRG4 השוואה
השוואה מפורטת זה לצד זה של NE5534D מאת Texas Instruments ו NE5534DRG4 מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | NE5534D | NE5534DRG4 |
|---|---|---|
| מותג | Texas Instruments | Texas Instruments |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | Unknown |
| Product Type | Single low-noise operational amplifier | — |
| Manufacturer | Texas Instruments | — |
| Number of Circuits | 1 | — |
| מארז | 8-SOIC | 8-SOIC |
| סוג הרכבה | Surface Mount | Surface mount |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 dB typical | — |
| Slew Rate | 13 V/us typical | 13 V/µs typical |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | 100 V/mV typical under cited conditions |
| טווח טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| סטטוס RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | Single low-noise operational amplifier |
| Noise Voltage Density | — | 3.5 nV/√Hz typical |
| High DC Voltage Gain | — | 100 dB typical |
| Supply Voltage Range | — | Wide supply-voltage range; exact limits [DATA_NEEDED: supply voltage range] |
| Circuit Count | — | 1 circuit |
| Package Width | — | 0.154 inch / 3.90 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Current | — | [DATA_NEEDED: output current] |