PCA9544APW vs PCA9544ARGYR तुलना

विस्तृत दोनों ओर की तुलना PCA9544APW द्वारा NXP Semiconductors और PCA9544ARGYR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
PCA9544APW PCA9544APW - 4-Channel I2C Switch | NXP | Embedded

PCA9544APW - 4-Channel I2C Switch | NXP | Embedded

PCA9544APW ✓ सक्रिय
Texas Instruments
PCA9544ARGYR PCA9544ARGYR - 4-Ch I2C/SMBus Multiplexer | TI

PCA9544ARGYR - 4-Ch I2C/SMBus Multiplexer | TI

PCA9544ARGYR ✓ सक्रिय

विशेषता तुलना

पैरामीटर PCA9544APW PCA9544ARGYR
ब्रांड NXP Semiconductors Texas Instruments
श्रेणी Interface ICs Logic ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type 4-channel bidirectional I2C-bus translating multiplexer —
Number of Channels 4 channels 4
Upstream Bus Pairs 1 SCL/SDA pair —
Downstream Bus Pairs 4 SCx/SDx pairs —
Simultaneously Selected Channels 1 channel —
I2C-Bus Frequency 400 kHz —
Signal Direction Bidirectional —
Interrupt Logic Included —
पैकेज 20-pin TSSOP VQFN-20 (RGY), 3.5 mm x 4.5 mm
माउंटिंग प्रकार Surface mount Surface Mount
Device Classification Translating switch interface IC —
लाइफसाइकिल स्थिति Active —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 2.3 V to 5.5 V
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
फ़ंक्शन — 4-channel I2C/SMBus multiplexer with interrupt logic
Bus Type — I2C and SMBus compatible
Voltage Translation — Yes, bidirectional translating switches
Interrupt Inputs — 4 (active-low)
Interrupt Output — 1 (active-low, open-drain)
Address Pins — 3 (A0, A1, A2), up to 8 devices per bus
ऑपरेटिंग तापमान — -40C to +85C
Maximum Power Dissipation — 400 mW
Power-On Reset — Yes, all channels deselected at power-up
सप्लाई करंट — [DATA_NEEDED: Supply Current]
Serial Interface Speed — [DATA_NEEDED: Serial Interface Speed]
MSL स्तर — [DATA_NEEDED: MSL Level]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध