NXP Semiconductors

PCA9544APW - 4-Channel I2C Switch | NXP | Embedded

MPN: PCA9544APW ✓ सक्रिय
20-pin TSSOP Package 400 kHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

PCA9544APW अवलोकन

The NXP Semiconductors PCA9544APW is a four-channel bidirectional I2C-bus translating multiplexer with interrupt logic, operating at up to 400 kHz and housed in a 20-pin TSSOP package. It allows one upstream SCL/SDA pair to fan out to four downstream SCx/SDx channel pairs while only one channel is connected at a time.

An I2C-bus multiplexer is a switching interface that expands a single serial bus into multiple selectable downstream branches. It belongs to the interface IC hierarchy, where bus switches and multiplexers manage address, command, and data routing between a controller and multiple peripheral devices. Unlike a passive hub, this device provides controlled channel selection and bidirectional signal translation.

The PCA9544APW includes four selectable downstream channels, interrupt logic for downstream alert signaling, and bidirectional upstream and downstream SCL/SDA connections. Its 400 kHz bus capability suits conventional I2C systems operating below the maximum Standard-mode frequency. The 20-pin TSSOP package supports compact PCB layouts in embedded control, industrial instrumentation, and consumer equipment.

Channel selection is performed through the upstream I2C control interface. The active configuration determines which SCx/SDx pair is connected to the common SCL/SDA bus, allowing a controller to address devices on only one branch at a time. Interrupt logic provides a dedicated path for downstream events, helping the host detect activity without continuously polling every channel.

Typical applications include sensor aggregation, programmable power supplies, EEPROM banks, communication interfaces, and industrial modules that place multiple devices behind one host bus. The four-channel architecture reduces the number of host GPIO pins and wiring connections required when peripheral addresses cannot all coexist on a single I2C segment.

During layout, keep the upstream and selected downstream routing short, follow the datasheet recommendations for pull-up resistors, and account for bus capacitance when selecting the operating speed. Pull-ups should normally be placed according to the system-level I2C topology rather than duplicated on every downstream branch.

This product page combines device functionality, verified source links, replacement guidance, application-specific design considerations, and parameter comparisons. These engineering details help distinguish a true same-package replacement from devices that merely perform a similar multiplexing function or require a different PCB footprint.

के लिए ड्रॉप-इन विकल्प PCA9544APW — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PCA9544APW (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Number of Channels, Package, Interrupt Logic, RoHS Status, Supply Voltage Range.

Texas Instruments
Number of Channels: 4
Package: VQFN-20 (RGY), 3.5 mm x 4.5 mm
RoHS Status: Compliant
इसके साथ तुलना करें PCA9544APW →
Texas Instruments
Number of Channels: 4 (SC0/SD0 to SC3/SD3)
Package: 20-TSSOP (PW)
Interrupt Logic: 4 interrupt inputs (INT0-INT3), 1 open-drain master INT output
इसके साथ तुलना करें PCA9544APW →

PCA9544ARGYR

✅ ड्रॉप-इन
Texas Instruments
📦 20-pin TSSOP (PW)
4-channel I2C/SMBus multiplexer with interrupt logic · 4 · 2.3 V to 5.5 V · I2C and SMBus compatible · Yes, bidirectional translating switches · 4 (active-low) · 1 (active-low, open-drain) · 3 (A0, A1, A2), up to 8 devices per bus

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCA9544APW Maximum Ratings और Electrical Characteristics

Product Type 4-channel bidirectional I2C-bus translating multiplexer
Number of Channels 4 channels
Upstream Bus Pairs 1 SCL/SDA pair
Downstream Bus Pairs 4 SCx/SDx pairs
Simultaneously Selected Channels 1 channel
I2C-Bus Frequency 400 kHz
Signal Direction Bidirectional
Interrupt Logic Included
पैकेज 20-pin TSSOP
माउंटिंग प्रकार Surface mount
Device Classification Translating switch interface IC
लाइफसाइकिल स्थिति Active

PCA9544APW 20-pin tssop पिन कॉन्फ़िगरेशन गाइड

PCA9544APW (20-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

PCA9544APW के लिए 20-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCA9544APW.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PCA9544APW के लिए उपयुक्त है 6 अनुप्रयोगs: Multi-Sensor Acquisition, Programmable Power Supply Control, Industrial Instrumentation, EEPROM and Configuration Banks, Communication Interface Isolation, Embedded Control Hubs.

🧩

Multi-Sensor Acquisition

The PCA9544APW fits multi-sensor acquisition systems in which several sensor groups cannot occupy one I2C segment or share identical addresses. Its four selectable SCx/SDx branches connect one at a time to the upstream controller, while the 400 kHz bus rate accommodates many standard embedded sensors. Place each sensor group behind its assigned downstream pair and use software to select the required branch. Because only one channel conducts at a time, the host must avoid simultaneous commands to devices on different branches. Bus capacitance and pull-up values should be calculated for the longest selected path, while interrupt logic can signal downstream activity and reduce unnecessary polling.

⚡

Programmable Power Supply Control

The PCA9544APW can separate multiple digital monitoring or configuration paths used in programmable power-supply controllers. Four downstream SCx/SDx pairs allow temperature sensors, current monitors, EEPROMs, or configuration devices to share a compact controller footprint even when their address requirements differ. The 400 kHz I2C rate provides adequate control bandwidth for supervisory reads and parameter updates. Firmware should select one branch for each transaction and avoid simultaneous downstream activity. Pull-up placement must preserve a valid bus topology across the selected channel, and the interrupt path can indicate a downstream event requiring prompt attention.

🏭

Industrial Instrumentation

The PCA9544APW is useful in industrial instrumentation modules that combine several low-speed I2C peripherals behind a single host interface. The four-channel architecture reduces duplicated wiring and can separate devices with conflicting addresses or different update schedules. Its bidirectional translating-switch architecture and 400 kHz operating rate support controller-to-sensor and sensor-to-controller traffic. The TSSOP-20 package leaves board area for analog and power circuitry, but thermal and environmental requirements should be checked against the selected ordering option. Interrupt logic can support responsive detection of remote events while the controller polls only the branch that requires service.

🖥️

EEPROM and Configuration Banks

The PCA9544APW can organize EEPROM and configuration-device banks on boards where multiple parts cannot coexist on one unsegmented I2C bus. Four selectable downstream pairs let a controller address one memory bank at a time through a common upstream SCL/SDA connection. The 400 kHz limit is suitable for many configuration and EEPROM transactions, while interrupt logic can provide an alert path from downstream devices that support it. Firmware should include channel selection in each transfer sequence and account for the extra bus turnaround overhead. PCB pull-ups should be arranged to prevent multiple inactive branches from loading the selected channel.

🌐

Communication Interface Isolation

The PCA9544APW can partition communication-related I2C peripherals into individually selectable branches, helping a host avoid simultaneous activity on separate downstream segments. Its four SCx/SDx pairs and bidirectional routing support sensors, transceivers, and status devices that share a common upstream bus. At up to 400 kHz, the device is best matched to control traffic rather than high-bandwidth payload transfers. Interrupt logic allows a system to react to selected downstream alert conditions. The layout should minimize stubs on the active channel and use a pull-up strategy that remains valid when different branches are enabled over the product lifecycle.

🔧

Embedded Control Hubs

The PCA9544APW fits embedded control hubs that need to connect four groups of I2C peripherals to one processor or microcontroller. It replaces several direct host-bus branches with a controlled multiplexer while preserving four possible downstream paths. The 20-pin TSSOP package supports dense layouts, and the 400 kHz bus rate is suitable for configuration, monitoring, and sensor-control traffic. The selected channel should be driven for the duration of a transaction, and firmware should not assume that multiple downstream devices can communicate concurrently. Correct external pull-up placement and channel-aware capacitance checks are essential for reliable operation at the upper bus rate.

अनुशंसित उत्पादों का सारांश

PCA9544APW NXP Semiconductors उपयोग में: Multi-Sensor Acquisition, Programmable Power Supply Control, Industrial Instrumentation, EEPROM and Configuration Banks, Communication Interface Isolation, Embedded Control Hubs PCA9544APW,118 Orderable PCA9544APW configuration उपयोग में: Multi-Sensor Acquisition, Industrial Instrumentation, Communication Interface Isolation PCA9544A Pin-compatible four-channel alternative उपयोग में: Programmable Power Supply Control, EEPROM and Configuration Banks, Embedded Control Hubs
What is the PCA9544APW and what does it do?
The PCA9544APW is a four-channel bidirectional I2C-bus translating multiplexer with interrupt logic. According to the NXP product description, one upstream SCL/SDA pair fans out to four downstream SCx/SDx pairs, with only one channel selected at a time. It operates at up to 400 kHz and is packaged in a 20-pin TSSOP for compact embedded and industrial systems.
Where can I download the PCA9544APW datasheet?
The official PCA9544APW datasheet is available from the NXP product page at https://www.nxp.com/part/PCA9544APW. The page provides the manufacturer datasheet and product information for the four-channel, 400 kHz translating multiplexer. Use the manufacturer PDF for the authoritative pin description, electrical limits, recommended application circuit, and package drawing.
How many I2C channels does the PCA9544APW provide?
The PCA9544APW provides four downstream I2C channels, each with an SCx/SDx pair, while one common upstream SCL/SDA pair connects to the host controller. Only one downstream channel is connected at a time. According to the NXP product information, this 1-of-4 arrangement supports controlled access to multiple peripheral branches without requiring a separate host bus for each device.
What is the maximum I2C bus frequency for PCA9544APW?
The PCA9544APW supports an I2C-bus frequency of 400 kHz. The manufacturer classifies the device as a four-channel I2C multiplexer with interrupt logic. Actual system throughput can be lower because address scanning, bus turnaround, channel selection, and peripheral response time also affect effective communication performance.
Does the PCA9544APW have interrupt logic?
Yes, the PCA9544APW includes interrupt logic. The NXP product page identifies the component as a four-channel I2C-bus multiplexer with interrupt logic. This allows a host system to receive an alert associated with downstream bus activity instead of continuously polling every selected peripheral branch.
Is PCA9544APW suitable for multi-sensor systems?
The PCA9544APW is suitable for multi-sensor systems when each sensor group is connected to a separate downstream channel. Its four selectable SCx/SDx pairs and 400 kHz operating limit fit many Standard-mode sensor architectures. Choose a downstream bus speed appropriate for the sensors, and avoid presenting multiple active channels simultaneously because only one channel is connected at a time.
PCA9544APW vs PCA9548APW: which multiplexer should I choose?
The PCA9544APW has four downstream channels, whereas the PCA9548APW provides eight downstream channels. According to the manufacturer descriptions, both perform bidirectional I2C multiplexing, but the larger channel count in PCA9548APW can reduce the need for cascaded devices. Package and pin compatibility must be checked separately before treating either device as a replacement.
PCA9544APW vs PCA9545APW: which one is preferable?
The PCA9544APW is a four-channel multiplexer with interrupt logic, while the PCA9545APW is described as a dual-function device for seamless data transfer and control. The PCA9544APW is appropriate when a conventional 1-of-4 I2C branch structure and downstream interrupt handling are required. Confirm the complete pin function and application circuit before substituting the PCA9545APW.
When should I choose PCA9544APW over a direct I2C connection?
Choose PCA9544APW when the design has more than one peripheral branch, conflicting device addresses, or a need to isolate downstream traffic from the host bus. A direct connection is simpler when every peripheral can share one bus segment without address conflicts. The PCA9544APW adds control and routing flexibility but requires correct pull-up placement and channel-selection firmware.
Is PCA9544APW suitable for industrial control modules?
The PCA9544APW is appropriate for industrial control modules that need several I2C peripheral groups and bus isolation by channel selection. Its 20-pin TSSOP package is compact, and the 400 kHz bus rate supports common embedded I2C peripherals. Final qualification still depends on the required temperature range, supply limits, and reliability specifications.
What is the best drop-in replacement for PCA9544APW?
The PCA9544A from Texas Instruments is the closest identified same-family drop-in candidate because the manufacturer describes it as an upgraded-functionality replacement for the compared device. Confirm that the replacement is ordered in the 20-pin TSSOP option and verify every pin function, electrical limit, and control-register behavior before production use.
Can PCA9544A replace PCA9544APW?
The PCA9544A can serve as a replacement candidate because the Texas Instruments product page identifies it as a drop-in replacement with upgraded functionality. Use the 20-pin TSSOP ordering option to preserve the PCB footprint. Final approval should include a register-by-register, pin-function, voltage-level, and interrupt-behavior comparison against the NXP datasheet.
Where can I buy PCA9544APW online?
Use the Request a Quote form on this page to request PCA9544APW availability, lead time, and order quantities. The request can specify the required 20-pin TSSOP configuration, shipment quantity, and target delivery schedule. The manufacturer product page at https://www.nxp.com/part/PCA9544APW is the appropriate reference for lifecycle and device documentation.
What is the price of PCA9544APW?
Current PCA9544APW commercial terms are shown through the Request a Quote form on this page. Submit the required quantity and packaging preferences to obtain the applicable offer, lead time, and availability confirmation. Because quotations and component availability can change, request the current terms for each planned production run.
Is PCA9544APW in stock and what is its lead time?
Use the Request a Quote form on this page to check current PCA9544APW stock status, lead time, and minimum order quantity. Include your production schedule and required 20-pin TSSOP quantity so the response reflects the relevant order conditions. The manufacturer currently identifies the device as active.
What are the key specifications of PCA9544APW that engineers should know?
The key PCA9544APW specifications are four selectable downstream channels, one upstream SCL/SDA pair, bidirectional signal routing, interrupt logic, operation up to 400 kHz, and a 20-pin TSSOP package. According to the NXP product description, only one downstream channel connects at a time. The design must also account for address conflicts, pull-up topology, capacitance, and the required operating temperature range.

के लिए इंजीनियरिंग संदर्भ डेटा PCA9544APW — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose PCA9544APW when a compact embedded design needs four selectively addressable I2C branches, bidirectional routing, and interrupt handling in a 20-pin TSSOP package. It is particularly useful when downstream peripherals have conflicting addresses or when only one branch should communicate at a time. The PCA9544A is the closest identified drop-in candidate when its 20-pin PW version is needed as a second-source option, but verify register behavior, interrupt polarity, voltage limits, and timing before substitution. Devices such as PCA9548APW and PCA9545APW serve different channel-count or functional requirements and should not be treated as direct replacements without a package and pin-function review. For a simple bus containing one nonconflicting peripheral, a direct connection remains simpler and less costly.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PCA9544A
Package 20-pin TSSOP 20-pin TSSOP (PW)
Brand NXP Semiconductors Texas Instruments
Channel Count 4 channels 4 channels

मुख्य विशेषताएँ

  • Four independently selectable I2C branches (बनामPCA9544A)
  • Integrated downstream interrupt handling (बनामPCA9544A)
  • Standard-mode I2C throughput (बनामPCA9544A)

डिज़ाइन नोट्स

Route the upstream SCL/SDA pair and every downstream SCx/SDx pair as short, controlled branches. Avoid long stubs because capacitance increases with trace length and can reduce the reliable bus margin at 400 kHz. Follow the manufacturer application circuit for pull-up placement, and ensure inactive branches do not create excessive parallel loading on the selected channel.

Treat the selected downstream channel as the active I2C segment and include channel-selection time in the controller timing budget. The PCA9544APW connects one downstream pair at a time, so simultaneous transactions on different branches are not supported. Confirm rise-time behavior with the actual bus capacitance and pull-up resistance before selecting the maximum operating frequency.

Use stable bypass capacitance at the device supply pins and place the decoupling components close to the package according to the manufacturer layout guidance. Keep switching regulators and high-current digital nodes separated from the I2C traces where practical, because supply disturbance can affect bus levels even when the selected downstream channel is inactive.

Do not treat a shared TSSOP package as proof of complete compatibility. Before replacing PCA9544APW, compare pin names, address-control behavior, interrupt polarity, electrical limits, supply range, and timing requirements. A production substitution should also be checked for differences in channel isolation, power consumption, and default control-register state.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product is an active I2C interface IC. Specific environmental and material-compliance declarations must be confirmed for the selected orderable configuration.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

pca9544apw datasheet PCA9544APW datasheet pdf PCA9544APW pinout PCA9544APW schematic PCA9544APW equivalent PCA9544APW replacement PCA9544APW drop-in replacement PCA9544APW footprint PCA9544APW application circuit NXP PCA9544APW price

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors PCA9544APW PCA9544A PCA9548APW PCA9545APW I2C-bus multiplexer bidirectional translating multiplexer bus switch interface IC semiconductor SCL SDA interrupt logic bidirectional signaling 400 kHz I2C 20-pin TSSOP TSSOP package family surface-mount package embedded control industrial instrumentation sensor acquisition power management RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें