PCA9548APW vs PCA9548A तुलना

विस्तृत दोनों ओर की तुलना PCA9548APW द्वारा NXP Semiconductors और PCA9548A द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
PCA9548APW PCA9548APW - 8-Channel I2C-Bus Switch with Reset | NXP Semiconductors

PCA9548APW - 8-Channel I2C-Bus Switch with Reset | NXP Semiconductors

PCA9548APW ✓ सक्रिय
Texas Instruments
PCA9548A PCA9548A - 8-Channel I2C Switch with Reset | TI

PCA9548A - 8-Channel I2C Switch with Reset | TI

PCA9548A ✓ सक्रिय

विशेषता तुलना

पैरामीटर PCA9548APW PCA9548A
ब्रांड NXP Semiconductors Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन 8-channel I2C-bus bidirectional translating switch with reset 8-channel bidirectional I2C translating switch
Number of Channels 8 (SCx/SDx downstream pairs) 8 downstream SCx/SDx pairs
Address Pins 3 (A0, A1, A2) - up to 8 devices on bus (64 channels) —
Supply Voltage (VDD) 2.3 V to 5.5 V —
I/O Voltage Tolerance Up to 5.5 V (independent of VDD level-shifting) —
RESET Input Active-low; clears channel selection and deselects all switches —
I2C Clock Frequency 0 kHz to 400 kHz (Standard and Fast-mode) —
Channel On-Resistance [DATA_NEEDED: typical Ron at 3.3V / 5V] —
Standby Current [DATA_NEEDED: typical standby ICC] —
ऑपरेटिंग तापमान -40 C to +85 C [DATA_NEEDED: operating temperature range]
पैकेज 24-TSSOP (PW, 7.8 mm body) 24-TSSOP (PW)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 1 (per JEDEC J-STD-020) —
Lead-Free / RoHS Yes (compliant) —
Compliance RoHS, REACH (per NXP product page) —
Supply Voltage Range — 2.3 V to 5.5 V
I2C Bus Speed Support — Standard-Mode 100 kHz, Fast-Mode 400 kHz
Control Interface — I2C/SMBus, single 8-bit control register
Hardware Address Pins — 3 (A0, A1, A2) - up to 8 devices per bus
Reset Input — Yes, active-low RESET
Voltage Translation — Yes, via pass-gate switch voltage referencing
इंटरफ़ेस प्रकार — 2-wire bus (SCL/SDA)
Channel Selection — Individual or any combination of channels
Power-On Reset — Internal, resets registers to default state
RoHS स्थिति — Compliant
क्वाइसेंट करंट — [DATA_NEEDED: quiescent current]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध