PCA9555DBR vs PCA9564D तुलना

विस्तृत दोनों ओर की तुलना PCA9555DBR द्वारा NXP Semiconductors और PCA9564D द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
PCA9555DBR PCA9555DBR - 16-Bit I2C GPIO Expander with Interrupt | NXP (Tape & Reel)

PCA9555DBR - 16-Bit I2C GPIO Expander with Interrupt | NXP (Tape & Reel)

PCA9555DBR ✓ सक्रिय
NXP Semiconductors
PCA9564D PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D ✓ सक्रिय

विशेषता तुलना

पैरामीटर PCA9555DBR PCA9564D
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type 16-bit I2C/SMBus GPIO expander with interrupt —
GPIO Count 16 bits —
Operating Voltage Range 2.3 V to 5.5 V —
I2C Maximum Frequency 400 kHz —
I2C/SMBus Interface Two-wire serial interface —
I/O Port Configuration Input or output per bit —
I/O Port Tolerance 5 V tolerant —
Interrupt Output Active-low, open-drain —
Standby Current 1 uA maximum —
Package Type SSOP-24 SOIC-20
Package Pitch 1.0 mm —
माउंटिंग प्रकार Surface mount Surface mount
Device Pin Count 24 pins —
Serial Addressing Seven-bit I2C address; [DATA_NEEDED: address table] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS स्थिति unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Controller Type — Parallel bus to I2C bus controller
Parallel Interface — 8-bit parallel bus
Serial Interface — I2C bus
Supply Voltage Range — 2.3 V to 3.6 V
Nominal Supply Voltage — 2.5 V or 3.3 V
सप्लाई करंट — 6 mA
Maximum I2C Bus Frequency — 400 kHz
पैकेज — 20-pin SO, 7.50 mm width
पिन की संख्या — 20
I2C Address Configuration — [DATA_NEEDED: programmable I2C address range and configuration method]
Parallel Data Width — 8 bits
I2C Addressing — [DATA_NEEDED: supported addressing modes]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध