PCA9555DBR vs PCA9564D 比較

詳細な並列比較: PCA9555DBR メーカー: NXP Semiconductors および PCA9564D メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

NXP Semiconductors
PCA9564D PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D ✓ 生産中

仕様比較

パラメータ PCA9555DBR PCA9564D
ブランド NXP Semiconductors NXP Semiconductors
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Device Type 16-bit I2C/SMBus GPIO expander with interrupt —
GPIO Count 16 bits —
Operating Voltage Range 2.3 V to 5.5 V —
I2C Maximum Frequency 400 kHz —
I2C/SMBus Interface Two-wire serial interface —
I/O Port Configuration Input or output per bit —
I/O Port Tolerance 5 V tolerant —
Interrupt Output Active-low, open-drain —
Standby Current 1 uA maximum —
Package Type SSOP-24 SOIC-20
Package Pitch 1.0 mm —
実装タイプ Surface mount Surface mount
Device Pin Count 24 pins —
Serial Addressing Seven-bit I2C address; [DATA_NEEDED: address table] —
動作温度範囲 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS ステータス unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Controller Type — Parallel bus to I2C bus controller
Parallel Interface — 8-bit parallel bus
Serial Interface — I2C bus
Supply Voltage Range — 2.3 V to 3.6 V
Nominal Supply Voltage — 2.5 V or 3.3 V
電源電流 — 6 mA
Maximum I2C Bus Frequency — 400 kHz
パッケージ — 20-pin SO, 7.50 mm width
ピン数 — 20
I2C Address Configuration — [DATA_NEEDED: programmable I2C address range and configuration method]
Parallel Data Width — 8 bits
I2C Addressing — [DATA_NEEDED: supported addressing modes]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼