PN7642EV-C101Y vs PN7642 तुलना
विस्तृत दोनों ओर की तुलना PN7642EV-C101Y द्वारा NXP Semiconductors और PN7642 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
PN7642EV-C101Y - NFC Controller, Cortex-M33, 64-VFBGA | NXP
PN7642EV-C101Y ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | PN7642EV-C101Y | PN7642 |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | RF Transceivers | RF Modules |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | NFC open controller (reader, card emulation, security subsystem) | NFC open controller (reader + MCU + secure element) |
| Core | Arm Cortex-M33 | Arm Cortex-M33 |
| Programmable Flash | 180 kB | 180 kB |
| Carrier Frequency | 13.56 MHz | — |
| सप्लाई वोल्टेज | 2.4 V to 5.5 V | [DATA_NEEDED: VDD range] |
| Maximum Supply Current | 400 mA | — |
| Protocols Supported | ISO 14443-3/4-A, ISO 14443-3/4-B, ISO 15693, ISO 18000-3 mode 1, ISO 18000-3 mode 3 / FeliCa, MIFARE, NFC | — |
| Card Emulation | ISO 14443-4A | — |
| Host Interfaces | I2C, SPI, UART, USB | — |
| GPIO | Up to 21 GPIOs, several with PWM | Multi-function; GPIO2 (PWM2), GPIO3 (PWM3) |
| Security Features | Secure key storage and cryptography (security toolbox) | — |
| Firmware | Version 02.00, pinless-download mode enabled by default (C101 suffix) | — |
| पैकेज | 64-VFBGA, 4.5 mm x 4.5 mm | BGA (PN7642EV orderable variants) |
| ऑपरेटिंग तापमान | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | Compliant (per JLCPCB listing) | Compliant (per NXP product page) |
| MSL स्तर | [DATA_NEEDED: MSL Level] | — |
| RF Frequency | — | 13.56 MHz (HF, NFC) |
| Supported NFC Protocols | — | ISO 14443 Type A and Type B; NFC Forum |
| Security Certification | — | Common Criteria EAL6+ |
| Payment Certification | — | EMVCo compliant |
| Host Interface | — | SPI (per PN76 family quick start guide) |
| ULPCD Support | — | Yes; GPIO3 must be dedicated to ULPCD abort when used |