PN7642EV-C101Y vs PN7642 Perbandingan
Perbandingan bersamaan detil PN7642EV-C101Y dari NXP Semiconductors dan PN7642 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
PN7642EV-C101Y - NFC Controller, Cortex-M33, 64-VFBGA | NXP
PN7642EV-C101Y ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | PN7642EV-C101Y | PN7642 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Transceivers | RF Modules |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | NFC open controller (reader, card emulation, security subsystem) | NFC open controller (reader + MCU + secure element) |
| Core | Arm Cortex-M33 | Arm Cortex-M33 |
| Programmable Flash | 180 kB | 180 kB |
| Carrier Frequency | 13.56 MHz | — |
| Tegangan Pemuat | 2.4 V to 5.5 V | [DATA_NEEDED: VDD range] |
| Maximum Supply Current | 400 mA | — |
| Protocols Supported | ISO 14443-3/4-A, ISO 14443-3/4-B, ISO 15693, ISO 18000-3 mode 1, ISO 18000-3 mode 3 / FeliCa, MIFARE, NFC | — |
| Card Emulation | ISO 14443-4A | — |
| Host Interfaces | I2C, SPI, UART, USB | — |
| GPIO | Up to 21 GPIOs, several with PWM | Multi-function; GPIO2 (PWM2), GPIO3 (PWM3) |
| Security Features | Secure key storage and cryptography (security toolbox) | — |
| Firmware | Version 02.00, pinless-download mode enabled by default (C101 suffix) | — |
| Paket | 64-VFBGA, 4.5 mm x 4.5 mm | BGA (PN7642EV orderable variants) |
| Suhu Kerja | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | Compliant (per JLCPCB listing) | Compliant (per NXP product page) |
| Level MSL | [DATA_NEEDED: MSL Level] | — |
| RF Frequency | — | 13.56 MHz (HF, NFC) |
| Supported NFC Protocols | — | ISO 14443 Type A and Type B; NFC Forum |
| Security Certification | — | Common Criteria EAL6+ |
| Payment Certification | — | EMVCo compliant |
| Host Interface | — | SPI (per PN76 family quick start guide) |
| ULPCD Support | — | Yes; GPIO3 must be dedicated to ULPCD abort when used |