S912XEG384J2CAL vs S912XEQ384F1MAL तुलना
विस्तृत दोनों ओर की तुलना S912XEG384J2CAL द्वारा NXP Semiconductors और S912XEQ384F1MAL द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)
S912XEG384J2CAL ✓ सक्रियNXP Semiconductors
S912XEQ384F1MAL - 16-bit S12X MCU 384KB Flash 50MHz | NXP
S912XEQ384F1MAL ✓ सक्रियविशेषता तुलना
| पैरामीटर | S912XEG384J2CAL | S912XEQ384F1MAL |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | HCS12X (S12X CPU + XGATE co-processor) | 16-bit RISC/CISC |
| Core Bit Width | 16-bit | — |
| Maximum CPU Frequency | 50 MHz | — |
| Program Flash Memory | 384 KB | — |
| SRAM | 24 KB | — |
| EEPROM | [DATA_NEEDED: EEPROM size] | — |
| XGATE Co-processor | Yes (RISC peripheral co-processor) | — |
| पैकेज | LQFP-112 (20x20 mm, CAL) | 112-LQFP (20x20 mm) |
| ऑपरेटिंग तापमान रेंज | -40C to +85C (industrial grade, 'J2' mask) | — |
| GPIO Count | Up to 91 | — |
| ADC | 12-bit SAR ADC, up to 24 channels | 12-bit, 3 us conversion time |
| CAN Interface | MSCAN (1 module) | — |
| Serial Interfaces | SCI (UART), SPI, I2C | — |
| Timers | ECT (16-bit), PIT, RTI | ECT, PIT, RTI |
| On-chip Voltage Regulator | Yes (internal 3.3V/5V) | — |
| सप्लाई वोल्टेज | 5V typical (3.3V-5.5V range) | 1.8 V / 2.8 V / 5 V |
| माउंटिंग प्रकार | Surface Mount (LQFP, gull-wing leads) | Surface Mount, Gull Wing |
| RoHS स्थिति | Compliant (per LCSC listing) | Compliant |
| Core Processor | — | HCS12X (S12XE) |
| Bus Speed | — | 50 MHz |
| Program Memory (Flash) | — | 384 KB (384K x 8) |
| RAM Size | — | 24 KB |
| EEPROM (hardware-emulated) | — | Configurable via Flash |
| Co-processor | — | XGATE up to 100 MHz |
| ऑपरेटिंग तापमान | — | -40C to +125C (automotive) |
| Connectivity | — | SCI, SPI, I2C, CAN |
| Memory Protection | — | MPU with supervisor/user modes |
| Debug Interface | — | JTAG / BDM |
| Qualification | — | Automotive Qualified |
| MSL स्तर | — | 3 (per JEDEC J-STD-020, 168 hours) |