S912XEG384J2CAL vs S912XEQ384F1MAL Karşılaştırma
Ayrıntılı yan yana karşılaştırma S912XEG384J2CAL tarafından NXP Semiconductors ve S912XEQ384F1MAL tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)
S912XEG384J2CAL ✓ AktifNXP Semiconductors
S912XEQ384F1MAL - 16-bit S12X MCU 384KB Flash 50MHz | NXP
S912XEQ384F1MAL ✓ AktifÖzellik Karşılaştırması
| Parametre | S912XEG384J2CAL | S912XEQ384F1MAL |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Core Architecture | HCS12X (S12X CPU + XGATE co-processor) | 16-bit RISC/CISC |
| Core Bit Width | 16-bit | — |
| Maximum CPU Frequency | 50 MHz | — |
| Program Flash Memory | 384 KB | — |
| SRAM | 24 KB | — |
| EEPROM | [DATA_NEEDED: EEPROM size] | — |
| XGATE Co-processor | Yes (RISC peripheral co-processor) | — |
| Paket | LQFP-112 (20x20 mm, CAL) | 112-LQFP (20x20 mm) |
| İşletim Sıcaklığı Aralığı | -40C to +85C (industrial grade, 'J2' mask) | — |
| GPIO Count | Up to 91 | — |
| ADC | 12-bit SAR ADC, up to 24 channels | 12-bit, 3 us conversion time |
| CAN Interface | MSCAN (1 module) | — |
| Serial Interfaces | SCI (UART), SPI, I2C | — |
| Timers | ECT (16-bit), PIT, RTI | ECT, PIT, RTI |
| On-chip Voltage Regulator | Yes (internal 3.3V/5V) | — |
| Besleme Gerilimi | 5V typical (3.3V-5.5V range) | 1.8 V / 2.8 V / 5 V |
| Montaj Türü | Surface Mount (LQFP, gull-wing leads) | Surface Mount, Gull Wing |
| RoHS Durumu | Compliant (per LCSC listing) | Compliant |
| Core Processor | — | HCS12X (S12XE) |
| Bus Speed | — | 50 MHz |
| Program Memory (Flash) | — | 384 KB (384K x 8) |
| RAM Size | — | 24 KB |
| EEPROM (hardware-emulated) | — | Configurable via Flash |
| Co-processor | — | XGATE up to 100 MHz |
| İşletim Sıcaklığı | — | -40C to +125C (automotive) |
| Connectivity | — | SCI, SPI, I2C, CAN |
| Memory Protection | — | MPU with supervisor/user modes |
| Debug Interface | — | JTAG / BDM |
| Qualification | — | Automotive Qualified |
| MSL Seviyesi | — | 3 (per JEDEC J-STD-020, 168 hours) |