SN65HVD21P vs SP485EEN-L तुलना

विस्तृत दोनों ओर की तुलना SN65HVD21P द्वारा Texas Instruments और SP485EEN-L द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD21P SN65HVD21P - Extended Common-Mode RS-485 Transceiver | Texas Instruments

SN65HVD21P - Extended Common-Mode RS-485 Transceiver | Texas Instruments

SN65HVD21P ✓ सक्रिय
MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD21P SP485EEN-L
ब्रांड Texas Instruments MaxLinear
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Extended common-mode RS-485 transceiver —
Transceiver Configuration 1/1 (one driver, one receiver), half duplex —
Supported Standards RS-485, RS-422 —
Number of Transmitters 1 —
Number of Receivers 1 —
पैकेज PDIP (P), 8 pins 8-pin SOIC
पिन काउंट 8 —
माउंटिंग प्रकार Through-hole Surface mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] -40 C to +85 C
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Common-Mode Voltage Range [DATA_NEEDED: extended common-mode voltage limits] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Receiver Differential Threshold [DATA_NEEDED: receiver input sensitivity] —
Driver Output Differential Voltage [DATA_NEEDED: driver output levels] —
Quiescent Supply Current [DATA_NEEDED: quiescent current] —
Enable Pins Driver enable (DE), receiver enable (RE) —
Termination External, not integrated —
RoHS Compliance [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
Manufacturer Texas Instruments —
Product Type — Half-duplex RS-422/RS-485 transceiver
Transmitter and Receiver Count — 1 transmitter and 1 receiver
डेटा दर — 10,000 kbps
Alternate Family Data Rate — Up to 5 Mbps
ऑपरेटिंग सप्लाई वोल्टेज — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Duplex Mode — Half-duplex
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध