SN65HVD21P vs SP485EEN-L So sánh

So sánh chi tiết song song của SN65HVD21P bằng Texas Instruments và SP485EEN-L bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD21P SN65HVD21P - Extended Common-Mode RS-485 Transceiver | Texas Instruments

SN65HVD21P - Extended Common-Mode RS-485 Transceiver | Texas Instruments

SN65HVD21P ✓ Hoạt động
MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD21P SP485EEN-L
Thương hiệu Texas Instruments MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type Extended common-mode RS-485 transceiver —
Transceiver Configuration 1/1 (one driver, one receiver), half duplex —
Supported Standards RS-485, RS-422 —
Number of Transmitters 1 —
Number of Receivers 1 —
Hộp PDIP (P), 8 pins 8-pin SOIC
Số chân 8 —
Kiểu lắp đặt Through-hole Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 C to +85 C
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Common-Mode Voltage Range [DATA_NEEDED: extended common-mode voltage limits] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Receiver Differential Threshold [DATA_NEEDED: receiver input sensitivity] —
Driver Output Differential Voltage [DATA_NEEDED: driver output levels] —
Quiescent Supply Current [DATA_NEEDED: quiescent current] —
Enable Pins Driver enable (DE), receiver enable (RE) —
Termination External, not integrated —
RoHS Compliance [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
Manufacturer Texas Instruments —
Product Type — Half-duplex RS-422/RS-485 transceiver
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Tốc độ dữ liệu — 10,000 kbps
Alternate Family Data Rate — Up to 5 Mbps
Điện áp cung cấp hoạt động — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Duplex Mode — Half-duplex
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá