SN65HVD231DR vs SN65HVD230DR तुलना
विस्तृत दोनों ओर की तुलना SN65HVD231DR द्वारा Texas Instruments और SN65HVD230DR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
SN65HVD231DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD231DR ✓ सक्रियTexas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ सक्रियविशेषता तुलना
| पैरामीटर | SN65HVD231DR | SN65HVD230DR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 3.3 V CAN transceiver | CAN Bus Transceiver |
| सप्लाई वोल्टेज | 3 V to 3.6 V | 3 V to 3.6 V (3.3 V nominal) |
| Maximum Signaling Rate | 1 Mbps | — |
| Standard Compatibility | ISO 11898-2 high-speed CAN physical layer | — |
| Bus Nodes | Up to 120 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Receiver Input Impedance | High input impedance | — |
| Low-Power Mode | Sleep mode | — |
| पैकेज | 8-pin SOIC | 8-SOIC (D) |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| डेटा दर | Up to 1 Mbps | — |
| CAN Bus Pins | CANH and CANL | — |
| Unpowered-Node Behavior | Does not disturb the bus | — |
| Driver Transition Time | Adjustable for improved signal quality | — |
| RoHS स्थिति | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | -40C to +85C |
| क्वाइसेंट करंट | [DATA_NEEDED: sleep-mode and standby current specifications] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Maximum Data Rate | — | 1 Mbps |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| RS Pin Function | — | Slew-rate control via external resistor |