SP3485EN-L vs THVD1450 तुलना
विस्तृत दोनों ओर की तुलना SP3485EN-L द्वारा MaxLinear और THVD1450 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ सक्रियविशेषता तुलना
| पैरामीटर | SP3485EN-L | THVD1450 |
|---|---|---|
| ब्रांड | MaxLinear | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | Unknown | सक्रिय |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 Transceiver |
| Supply Voltage Range | 3.135 V to 3.465 V | 3 V to 5.5 V |
| Nominal Supply | 3.3 V | — |
| डेटा दर | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| पैकेज | 8-SOIC | 8-SOIC (D) |
| माउंटिंग प्रकार | Surface mount | — |
| Process Technology | BiCMOS | — |
| Pin Compatibility | Pin-to-pin compatible with Exar SP481, SP483, and SP485 devices and popular industry standards | — |
| Low-Power Operation | Low-power family specification | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| RoHS स्थिति | unknown | Compliant |
| REACH Status | unknown | — |
| Lead-Free Status | unknown | — |
| Manufacturer | — | Texas Instruments |
| Data Rate (Maximum) | — | 50 Mbps |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Half |
| ESD Protection (Bus Pins, IEC Air) | — | ±18 kV (HBM, IEC 61000-4-2) |
| ESD Protection (Contact, IEC) | — | ±8 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Differential Output Swing (Typical) | — | 1.5 V into 54 Ω |
| Fail-Safe Biasing | — | Open, short, idle |
| Number of Nodes (Unit Loads) | — | 256 (1/8 UL) |
| Logic Family Compatibility | — | 3.3 V and 5 V MCU / UART |
| Hot-Plug Support | — | Yes (glitch-free power-up) |