SP3485EN-L vs THVD1450 Perbandingan
Perbandingan bersamaan detil SP3485EN-L dari MaxLinear dan THVD1450 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | SP3485EN-L | THVD1450 |
|---|---|---|
| Merek | MaxLinear | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Unknown | Aktif |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 Transceiver |
| Supply Voltage Range | 3.135 V to 3.465 V | 3 V to 5.5 V |
| Nominal Supply | 3.3 V | — |
| Laju Data | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Paket | 8-SOIC | 8-SOIC (D) |
| Tipe Mounting | Surface mount | — |
| Process Technology | BiCMOS | — |
| Pin Compatibility | Pin-to-pin compatible with Exar SP481, SP483, and SP485 devices and popular industry standards | — |
| Low-Power Operation | Low-power family specification | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Status RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| Lead-Free Status | unknown | — |
| Manufacturer | — | Texas Instruments |
| Data Rate (Maximum) | — | 50 Mbps |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Half |
| ESD Protection (Bus Pins, IEC Air) | — | ±18 kV (HBM, IEC 61000-4-2) |
| ESD Protection (Contact, IEC) | — | ±8 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Differential Output Swing (Typical) | — | 1.5 V into 54 Ω |
| Fail-Safe Biasing | — | Open, short, idle |
| Number of Nodes (Unit Loads) | — | 256 (1/8 UL) |
| Logic Family Compatibility | — | 3.3 V and 5 V MCU / UART |
| Hot-Plug Support | — | Yes (glitch-free power-up) |