SP485BN-L vs ADM485ARZ तुलना
विस्तृत दोनों ओर की तुलना SP485BN-L द्वारा Sipex और ADM485ARZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ सक्रियविशेषता तुलना
| पैरामीटर | SP485BN-L | ADM485ARZ |
|---|---|---|
| ब्रांड | Sipex | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| डेटा दर | Up to 5 Mbps | 5 Mbps (max) |
| Interface Standards | RS-485 and RS-422 | — |
| Architecture | BiCMOS | — |
| Receiver Unit Load | 1/10 unit load | — |
| Duplex Mode | Half-duplex | — |
| पैकेज | 8-pin SOIC | SOIC-8 (SO-8) / SO-8 |
| माउंटिंग प्रकार | [DATA_NEEDED: mounting type] | Surface Mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Enable Control | [DATA_NEEDED: DE control electrical specification] | — |
| Receiver Enable Control | [DATA_NEEDED: /RE control electrical specification] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| RoHS स्थिति | RoHS listed in distributor product reference | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| सप्लाई वोल्टेज | — | 5 V (single supply) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL स्तर | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |