SP485BN-L vs ADM485ARZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma SP485BN-L tarafından Sipex ve ADM485ARZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktifÖzellik Karşılaştırması
| Parametre | SP485BN-L | ADM485ARZ |
|---|---|---|
| Marka | Sipex | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Veri Hızı | Up to 5 Mbps | 5 Mbps (max) |
| Interface Standards | RS-485 and RS-422 | — |
| Architecture | BiCMOS | — |
| Receiver Unit Load | 1/10 unit load | — |
| Duplex Mode | Half-duplex | — |
| Paket | 8-pin SOIC | SOIC-8 (SO-8) / SO-8 |
| Montaj Türü | [DATA_NEEDED: mounting type] | Surface Mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Enable Control | [DATA_NEEDED: DE control electrical specification] | — |
| Receiver Enable Control | [DATA_NEEDED: /RE control electrical specification] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| RoHS Durumu | RoHS listed in distributor product reference | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Besleme Gerilimi | — | 5 V (single supply) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL Seviyesi | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |