SP485CN-L vs MAX485CSA+ तुलना

विस्तृत दोनों ओर की तुलना SP485CN-L द्वारा MaxLinear और MAX485CSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

MaxLinear
SP485CN-L SP485CN-L - 5Mbps Half-Duplex RS-485 IC | MaxLinear

SP485CN-L - 5Mbps Half-Duplex RS-485 IC | MaxLinear

SP485CN-L ✓ सक्रिय
Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर SP485CN-L MAX485CSA+
ब्रांड MaxLinear Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Transceiver Type Single transmitter/single receiver half-duplex transceiver —
Supported Protocols RS-422 and RS-485 —
Maximum Data Rate 5 Mbps 2.5Mbps
Supply Voltage Range 4.75 V to 5.25 V —
Logic and Bus Function Bidifferential half-duplex serial interface —
Architecture BiCMOS —
Power Class Low-power operation —
Driver Count 1 —
Receiver Count 1 —
पैकेज 8-pin SOIC 8-pin SOIC
माउंटिंग प्रकार Surface Mount Surface mount
Temperature Range 0 C to 70 C —
Bus Topology Half-duplex differential bus —
Signaling Differential RS-422/RS-485 —
EMI Behavior [DATA_NEEDED: slew-rate and transient-emission details] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Propagation Delay [DATA_NEEDED: propagation delay] —
क्वाइसेंट करंट [DATA_NEEDED: quiescent current] —
Driver Output Current [DATA_NEEDED: driver output current] [DATA_NEEDED: driver output current]
Termination Requirement [DATA_NEEDED: manufacturer termination and biasing guidance] —
RoHS स्थिति [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
AEC-Q100 Qualification not_applicable [DATA_NEEDED: AEC-Q100 qualification status]
Transceiver Configuration — 1 driver and 1 receiver
Communication Standards — RS-485 and RS-422
Duplex Mode — Half-duplex
Driver Slew Rate — Unlimited for the MAX485 family
Device Type — Low-power differential transceiver
पिन काउंट — 8 pins
सप्लाई वोल्टेज — [DATA_NEEDED: supply voltage range]
सप्लाई करंट — [DATA_NEEDED: unloaded and loaded supply current]
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: MAX485CSA operating temperature range]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: receiver differential input sensitivity]
Short-Circuit Protection — [DATA_NEEDED: driver short-circuit protection duration]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध