SP485CN-L vs MAX485CSA+ So sánh

So sánh chi tiết song song của SP485CN-L bằng MaxLinear và MAX485CSA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485CN-L SP485CN-L - 5Mbps Half-Duplex RS-485 IC | MaxLinear

SP485CN-L - 5Mbps Half-Duplex RS-485 IC | MaxLinear

SP485CN-L ✓ Hoạt động
Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485CN-L MAX485CSA+
Thương hiệu MaxLinear Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Transceiver Type Single transmitter/single receiver half-duplex transceiver —
Supported Protocols RS-422 and RS-485 —
Maximum Data Rate 5 Mbps 2.5Mbps
Supply Voltage Range 4.75 V to 5.25 V —
Logic and Bus Function Bidifferential half-duplex serial interface —
Architecture BiCMOS —
Power Class Low-power operation —
Driver Count 1 —
Receiver Count 1 —
Hộp 8-pin SOIC 8-pin SOIC
Kiểu lắp đặt Surface Mount Surface mount
Temperature Range 0 C to 70 C —
Bus Topology Half-duplex differential bus —
Signaling Differential RS-422/RS-485 —
EMI Behavior [DATA_NEEDED: slew-rate and transient-emission details] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Điện áp yên tĩnh [DATA_NEEDED: quiescent current] —
Driver Output Current [DATA_NEEDED: driver output current] [DATA_NEEDED: driver output current]
Termination Requirement [DATA_NEEDED: manufacturer termination and biasing guidance] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
AEC-Q100 Qualification not_applicable [DATA_NEEDED: AEC-Q100 qualification status]
Transceiver Configuration — 1 driver and 1 receiver
Communication Standards — RS-485 and RS-422
Duplex Mode — Half-duplex
Driver Slew Rate — Unlimited for the MAX485 family
Device Type — Low-power differential transceiver
Số chân — 8 pins
Điện áp cung cấp — [DATA_NEEDED: supply voltage range]
Điện áp cung cấp — [DATA_NEEDED: unloaded and loaded supply current]
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: MAX485CSA operating temperature range]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: receiver differential input sensitivity]
Short-Circuit Protection — [DATA_NEEDED: driver short-circuit protection duration]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá