SP485EEN-L vs SP485EN-L तुलना

विस्तृत दोनों ओर की तुलना SP485EEN-L द्वारा MaxLinear और SP485EN-L द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ सक्रिय
MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ सक्रिय

विशेषता तुलना

पैरामीटर SP485EEN-L SP485EN-L
ब्रांड MaxLinear MaxLinear
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-422/RS-485 transceiver Half-duplex differential transceiver
Transmitter and Receiver Count 1 transmitter and 1 receiver —
डेटा दर 10,000 kbps —
Alternate Family Data Rate Up to 5 Mbps —
ऑपरेटिंग सप्लाई वोल्टेज 4.75 V to 5.25 V —
ऑपरेटिंग तापमान रेंज -40 C to +85 C -40°C to +85°C
पैकेज 8-pin SOIC 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
ESD Tolerance, Human Body Model Greater than 15 kV —
ESD Tolerance, Air Discharge Method Greater than 15 kV under IEC1000-4-2 —
Supported Protocols RS-422 and RS-485 —
Duplex Mode Half-duplex Half-duplex
Power Classification Low-power interface IC —
EMI Characteristics Enhanced low-EMI design —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
RoHS स्थिति — unknown
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध