SP485EEN-L vs SP485EN-L So sánh

So sánh chi tiết song song của SP485EEN-L bằng MaxLinear và SP485EN-L bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ Hoạt động
MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485EEN-L SP485EN-L
Thương hiệu MaxLinear MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-422/RS-485 transceiver Half-duplex differential transceiver
Transmitter and Receiver Count 1 transmitter and 1 receiver —
Tốc độ dữ liệu 10,000 kbps —
Alternate Family Data Rate Up to 5 Mbps —
Điện áp cung cấp hoạt động 4.75 V to 5.25 V —
Khoảng nhiệt độ hoạt động -40 C to +85 C -40°C to +85°C
Hộp 8-pin SOIC 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
ESD Tolerance, Human Body Model Greater than 15 kV —
ESD Tolerance, Air Discharge Method Greater than 15 kV under IEC1000-4-2 —
Supported Protocols RS-422 and RS-485 —
Duplex Mode Half-duplex Half-duplex
Power Classification Low-power interface IC —
EMI Characteristics Enhanced low-EMI design —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
Trạng thái RoHS — unknown
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá