STM32F103VGT6J vs STM32F103VGT7 तुलना
विस्तृत दोनों ओर की तुलना STM32F103VGT6J द्वारा STMicroelectronics और STM32F103VGT7 द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
STM32F103VGT6J - 72MHz Cortex-M3 1MB MCU | STMicroelectronics
STM32F103VGT6J ✓ सक्रियSTMicroelectronics
STM32F103VGT7 - 72MHz Cortex-M3 MCU 1MB Flash 100-LQFP | ST
STM32F103VGT7 ✓ सक्रियविशेषता तुलना
| पैरामीटर | STM32F103VGT6J | STM32F103VGT7 |
|---|---|---|
| ब्रांड | STMicroelectronics | STMicroelectronics |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 32-bit ARM Cortex-M3 microcontroller | — |
| Manufacturer | STMicroelectronics | — |
| Series | STM32F1 | — |
| Maximum CPU Frequency | 72 MHz | — |
| CPU Core | ARM Cortex-M3 | — |
| Flash Memory | 1 MB (1M x 8 bits) | — |
| सप्लाई वोल्टेज | 3.3 V | — |
| पैकेज | 100-LQFP (14 x 14 mm) | 100-LQFP (14x14 mm) |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| पिन काउंट | 100 pins | — |
| Programmable I/O | [DATA_NEEDED: programmable I/O count] | — |
| SRAM | [DATA_NEEDED: SRAM capacity] | 96 KB |
| USB Interface | Supported | — |
| CAN Interface | Supported | — |
| Motor-Control Suitability | Supported | — |
| Product Line | Mainstream Performance | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Core | — | ARM Cortex-M3 |
| Core Architecture | — | 32-bit RISC, Harvard bus |
| Maximum CPU Clock | — | 72 MHz |
| Performance | — | 1.25 DMIPS/MHz (90 DMIPS) |
| Program Memory | — | 1 MB Flash |
| Operating Voltage | — | 2.0 V to 3.6 V |
| ऑपरेटिंग तापमान | — | -40 C to +105 C |
| GPIO Count | — | 80 |
| ADC | — | 2x 12-bit, up to 16 channels, 1 MSPS |
| Timers | — | 7x 16-bit + 1x PWM (motor control) |
| Communication | — | USB FS, 2x CAN 2.0B, 3x USART, 2x UART, 3x SPI, 2x I2S, 2x I2C, SDIO, FSMC |
| Debug Interface | — | JTAG + SWD + ETM |